Safety And Instructional Decals - Toro Power Clear 721 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
Order Part No. 117-9121
1. Cutting/dismemberment hazard, impeller and auger—do
not place your hand in the chute; remove the key and read
the Operator's Manual before performing maintenance.
94-2577
115-5698
133-8061
decal94-2577
1. Insert the key, press the
primer 3 times, move the
choke lever to the left, pull
the recoil-start handle, and
once the engine is running
move the choke lever to
the right.
2. Warning—read the
decal115-5698
Operator's Manual.
3. Explosion hazard—do not
tip the machine.
decal133-8061
1. Read the Operator's Manual—plug the machine in to power
the electric starter, press the electric-start button to start the
engine, and then remove the plug from the machine.
4
139-3505
4. Thrown object
hazard—keep bystanders
away.
5. Read the Operator's
Manual before servicing
the engine oil level.
6. Cutting/dismemberment
hazard of the hand,
rotor—shut off the engine,
remove the key, and wait
for all moving parts to
stop before leaving the
machine.
139-3506
decal139-3505
decal139-3506