Figure; Safety And Instructional Decals - Toro Power Clear 721 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
1. Cutting/dismemberment hazards of hand or foot, impeller
and auger—do not place your hand in the chute; remove
the ignition key and read the instructions before servicing
or performing maintenance.
94-2577
115-5660
decal94-2577
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—shut off
the engine and wait for
the auger to stop before
leaving the machine.
3. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
decal115-5660
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch on
3
117-9102
Order Part No. 117-6036
6. Engine switch off
7. Primer
8. Push the primer 3 times to
prime the engine.
9. Read the Operator's
Manual before checking
the engine-oil level.
133-8061
decal117-9102
decal133-8061