Table of Contents
Advertisement
Available languages
Available languages
d)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e)
Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)
Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Safety Instructions for
Dust Extraction Systems
• This attachment is intended for use in hammer
drilling applications in masonry or concrete, and
with solid drill bits mounted to the power tool.
• Do not use the attachment for drilling
applications in wood, steel or plastic.
• Do not use the attachment in core drilling
applications.
• Do not use the attachment for chiselling
applications.
• Do not use the attachment in any application
involving hazardous substances (e.g., asbestos).
• Do not use this attachment with other tools than
the models mentioned in this manual.
• Do not use the tool in damp or wet conditions.
• Do not expose the attachment to hot or glowing
particles.
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Dust Extraction System
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION
The Date Code, which also includes year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and dust box.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Dust extraction system
1 Dust brush
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
1 Dust extraction head
2 Dust brush
3 Depth stop
4 Length stop
5 Release button
EN GL IS H
21
Advertisement
Table of Contents
