Toro 136-0457 Installation Instructions Manual page 5

4
Routing the Wire Harness and Installing the Switches
Parts needed for this procedure:
1 Wire harness
1 Switch bracket
1 Rocker switch
1 Paddle switch
4 Bolts (M6)
1 Fuse, 15 amp
Procedure
Note: Lift the seat to route the wire harness.
1. Route the wire harness from the foam-marker compressor behind the ROPS and under the guard plate
1. ROPS
2. Wire harness
Figure 5
3. Guard plate
5
(Figure 5).
g200673