Table of Contents
Advertisement
Procedure
1. Connect the cables according to the guidelines for the HPE SimpliVity 2600 Gen10 networks only.
2. Ensure that no other network interfaces, such as optional 10 GbE interfaces, are connected to your network
before deploying the server to a federation.
Connect the optional network interfaces after deployment.
Caution:
If the optional interfaces are connected when you deploy the server, the ports for the Federation
network might not be configured correctly. For help with resolving this error, contact Customer Support
(support.hpe.com).
3. Repeat steps 1 and 2 for each server in the chassis.
Power up the server
Procedure overview
Chapter 2: Install the chassis components
17
Advertisement
Table of Contents
Need help?
Do you have a question about the SimpliVity 2600 Gen10 and is the answer not in the manual?
Questions and answers