At+Cnmi New Sms Message Indications - Siemens M20 Terminal Technical Description

Siemens Information and Communication Products
Reference Note
GSM 07.05 The CB SMS may be output in text or PDU format. The output format is set with the command
"AT+CMGF Select SMS message format" on page 94
Message identifiers (MI) over 999 are intended for telemetric applications. These CB SMS are not
stored permanently in the module, but are sent to the TE directly - taking account of the parameter
<bm> in the
AT+CSDH Show SMS text mode parameters
Test command Response
AT+CSDH=? +CSDH: (list of supported <show>s) OK
Parameter
see set command
Read command Response
AT+CSDH? +CSDH:<show> OK
Parameter
see set command
Set command Response
AT+CSDH= TA sets whether or not detailed header information is shown in text mode result codes.
<show>
OK
Parameter
<show>
Reference Note
GSM 07.05
Version 8 dated 15.03.00

"AT+CNMI New SMS message indications"

0 do not show header values defined in commands +CSCA and +CSMP
(<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or
<tooa> in +CMT, +CMGL, +CMGR result codes for SMS-DELIVERs and
SMS-SUBMITs in text mode; for SMS-COMMANDs in +CMGR result co-
de, do not show <pid>, <mn>, <da>, <toda>, <length> or <cdata>
1 show the values in result codes
AT command interface
.
command.
A
108