Frame Fs9 - Siemens BT300 Manual

Commissioning
3
Additionally for FS7, locate the DC grounding bus-bar between connectors R- and U and
detach the bus-bar from the frame by undoing the M4 screw.
Figure 57. FS7: Detaching the DC grounding bus-bar from frame.
6.3.3

Frame FS9

Follow the procedure described below to modify the EMC protection of the drive of frame FS9 to EMC-
level C4.
Find the Molex connector in the accessories bag. Remove the main cover of the drive and
1
locate the place for the connector next to the fan. Push the Molex connector in its place.
See Figure 58.
Connector
24-hour support +1-800-877-7545 (Dial 2)
9062.emf
Figure 58.
Siemens Industry, Inc. • 65
9063.emf