Prepare For Use Through Rs485 - Siemens BT300 Manual

Siemens Industry, Inc. • 54
Remount the drive cover.
3
NOTE:
When planning the cable runs, remember to keep the distance between the
Ethernet cable and the motor cable at a minimum of 30 cm (11.8 in.).
Ethernet
Cable
Type 1 / IP21
For more detailed information, see the user's manual of the fieldbus you are using.
5.2.2

Prepare for use through RS485

5.2.2.1 RS485 cable data
Connector
Cable type
Cable length
Type 12 / IP54
Figure 50.
Table 29. RS485 cable data.
2
2.5 mm (14 AWG)
STP (Shielded Twisted Pair), type Belden
9841 or similar
Depends on the used fieldbus. See respec-
tive bus manual.
9265bt
24-hour support +1-800-877-7545 (Dial 2)
Control unit