Starting The Engine; Shutting Off The Engine; Using The Motion-Control Levers - Toro TimeCutter 74726 Operator's Manual

Starting the Engine

Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
Figure 23

Shutting Off the Engine

1. Disengage the blades by moving the
blade-control switch to the O
23).
2. Engage the parking brake; refer to
(page 15).
3. Move the throttle control to the F
4. Turn the key to the O
the key.
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
Using the Motion-Control
Levers
g027581
1. Motion-control
lever—P
ARK
2. Center, unlocked position
3. Forward
26
position
FF
position and remove
FF
Figure 24
4. Backward
position
5. Front of machine
(Figure
Park Position
position.
AST
g004532