SUpeRmIG150.V3 MoDEl No: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BeFORe USING THIS pROdUCT, pleaSe Read THe INSTRUCTIONS CaReFUllY. maKe CaReFUl NOTe OF SaFeTY INSTRUCTIONS, WaRNINGS aNd CaUTIONS.
INTROdUCTION: All our Supermig models are suitable for welding with Co ² , Argon or Co ² /Argon mix. Each uses a forced air cooling system to slow fig.4 transformer heating in oder to increase duty cycle and a non-live torch to prevent the risk of accidentally striking an arc.
To keep the contact tip free from spatter, of a DC rectifier, and the negative clamp is attached to the we recommend the use of anti-spatter spray (MIG/722307) available workpiece. from your Sealey dealer. SUPERMIG150.V3 Issue No:1 15/05/09...
Page 5
In this is the case, return the welder to your local Sealey dealer for repair. SUPERMIG150.V3 Issue No:1 15/05/09...
93/68/EEC CE Marking Directive 2006/95/EC low Voltage Directive For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Welders. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.