User Access Level; Change User Password; Clear User Password; Password Check - NI RMC-8355 User Manual

1
Available when a supervisor password is set.
2
Available only when a user password is set.
© National Instruments

User Access Level

Select Full Access to grant the user full access to the Setup Utility, and
change setup settings. Select View Only to allow the user to access the
setup utility to view the settings without making changes. Select Limited
to allow the user to change selected settings such as date and time. Select
No Access to prevent the user from accessing the Setup Utility.

Change User Password

Select this feature and press <Enter> to access the submenu, and then enter
a new user password.

Clear User Password

Use this item to clear a user password after it has been entered.

Password Check

Use this item to check a password after it has been entered. The options are
Setup and Always.

Boot Sector Virus Protection

If this feature is enabled, the AMI BIOS displays a warning when any
program (or virus) issues a disk format command or attempts to write to the
boot sector of the hard disk drive. The options are Enabled and Disabled.
Clear User Password
Use this item to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The
options are Setup and Always.
Chapter 2
1
2
1
2-31
Installation and BIOS Setup
NI RMC-8355 User Manual