Introduction; Information On The Configuration Manual - Siemens SIMATIC NET SCALANCE W760 Series Configuration Manual

Introduction

1.1

Information on the Configuration Manual

Validity of the configuration manual
This Configuration Manual covers the following products:
● SCALANCE W721-1 RJ-45
● SCALANCE W722-1 RJ-45
● SCALANCE W761-1 RJ-45
This Configuration Manual applies to the following software version:
● SCALANCE W700 firmware as of Version V 5.00
Purpose of the Configuration Manual
This Configuration Manual is intended to provide you with the information you require to
commission and operate devices correctly. It explains how to configure the devices and how
to integrate them in a WLAN network.
The operating instructions for the corresponding device describe how to install and connect
up the devices correctly.
Orientation in the documentation
Apart from the Configuration Manual you are currently reading, the following documentation
is also available from SIMATIC NET on the topic of Industrial Wireless LANs:
● Configuration Manual: SCALANCE W760 / W720 Command Line Interface
This document contains the CLI commands that are supported by SCALANCE W700
devices.
● Performance data 802.11 abgn SCALANCE W760/W720
This document contains information about the frequency, modulation, transmit power and
receiver sensitivity.
● Operating Instructions SCALANCE W721-1 / W722-1 / W761-1
This document contains information on installing and connecting up the following
products and their approvals.
– SCALANCE W721-1 RJ-45
– SCALANCE W722-1 RJ-45
– SCALANCE W761-1 RJ-45
SCALANCE W760/W720 to IEEE 802.11n Web Based Management
Configuration Manual, 11/2014, C79000-G8976-C350-03
1
7