Siemens SINUMERIK 840D sl Commissioning Manual page 1011

1.2 Hardware configuration of PCU 50.5
1.2.1 Network settings
Ethernet interfaces of the PCU
The PCU 50.5 has two Ethernet interfaces with default settings suitable to connect to
SINUMERIK solution line:
Figure 1-1
Hardware Designation in
designations PCU Base Software
X1 Local Area Connection 2
X2 Local Area Connection
Further information
● Setting the IP address and domain (Page 23)
●
1.2.2 Viewing the name of the PCU
In the factory settings, a unique computer name is set in the PCU 50.5 . You can view and
change it in the Control Panel of the Service Desktop.
You will find the computer name in the Control Panel under category "System and Security,"
section "Computer name, domain, and workgroup settings."
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Ethernet interfaces of the PCU
Configuration
Preset as a default DHCP client for connection to a company network.
The IP address is dynamically fetched from the DHCP server at X1.
Preset as a SINUMERIK DHCP server for connection to a system network.
A fixed IP address is preset at X2: If 192.168.214.241 is free in the system network, it is set.
Otherwise you can view the allocated fixed IP address in the Control Panel.
SINUMERIK 840D sl Operator Components and Networking Manual
panels.
Delivery condition
1.2 Hardware configuration of PCU 50.5
Chapter
Operator
9