Chapter 4 Procedures Before Operation - Mitsubishi Electric Melsec iQ-R Series User Manual

4
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Mounting a module
Mount the control module in any desired configuration.
Page 27 Configuration of Laser Displacement Sensor
2.
Wiring
Perform wiring of external devices to the control module.
Page 32 Wiring Method
3.
Adding a module
Add the control module to a module configuration by using the engineering tool.
Page 37 Communication Example Between Control Module and Sensor Head
4.
Configuring parameter settings
Configure the parameter settings of the control module by using the engineering tool.
 MELSEC iQ-R Laser Displacement Sensor Control Module User's Manual (Application)
5.
Measuring an object
Configure the settings for connecting of sensor heads and proper measurement of objects by using the setting tool, and
measure the objects.
Page 22 Measuring an Object
6.
Programming
Create a program.
Page 37 Communication Example Between Control Module and Sensor Head
4 PROCEDURES BEFORE OPERATION
4
21