Model C712 Specifications - Taylor C712 Service Manual

INTRODUCTION

Model C712 Specifications

Freezing Cylinder
Two, 3.4 qt. (3.2 L)
Mix Hopper
1
Two, 20 qt. (18.9 L)
Beater Motor
Two, 1.5 hp
Refrigeration Machine
Two, approximately 9,500 BTU/hr compressors
Refrigerant R404A.
Electrical
Electrical
208-230/60/1 Air
208-230/60/1 Air, Syrup
208-230/60/1 Water
208-230/60/3 Air
208-230/60/3 Water
220-240/50/1 Water
380-415/50/3N~Air
1-4
Table 1-1
Minimum
Maximum
Circuit
Fuse Size
Ampacity
Left Right Left Right
35 35 27
40 35 28
35 35 26
25 20 19
25 20 18
30 25 22
12 10 11
This machine may be manufactured in other electrical
characteristics. Refer to the local Taylor distributor for
availability. (For exact electrical information, always see
the data label of the machine.)
Air-Cooled
Clearance: A minimum of 3 in. (76 mm) is required
around all sides. Install the deflector provided to prevent
recirculation of warm air.
Water-Cooled
Water inlet and drain connections under the side of the
base, 1/2 in. FPT.
Dimensions
Width: 25-7/16 in. (646 mm)
Height: 60 in. (1524 mm)
Depth: 36-3/16 in. (919 mm)
Floor Clearance*: 4-3/4 in. (121 mm)
*Mounted on standard casters
Approximate Weights
25
Net: 777 lbs. (352 kgs)
25
Crated: 855 lbs. (388 kgs)
Volume: 68.4 cu. ft. (1.94 cu m)
25
17
17
20
9
Models C712/C713
Introduction