Page 1
Operating and installation instructions Gourmet warming drawer To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 11 227 100...
Contents Warning and Safety instructions................ 4 Caring for the environment ................ 11 Overview....................... 12 ESW 7010, ESW 7110................... 12 ESW 7020, ESW 7030, ESW 7120 ................ 13 Controls and display ..................... 14 Accessories supplied .................... 15 Before using for the first time ................ 16 Cleaning the drawer for the first time ..............
Page 3
Contents Installation dimensions ESW 7010, ESW 7110.......... 44 Combination appliance with a height of 45 cm............. 44 Combination appliance with a height of 60 cm............. 45 Side view ....................... 46 Connections and ventilation.................. 47 Installation dimensions ESW 7020, ESW 7120.......... 48 Combination appliance with a height of 45 cm............. 48 Combination appliance with a height of 60 cm.............
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. Keep these instructions in a safe place and ensure that new users...
Page 5
Warning and Safety instructions Correct application This drawer is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/ shared facilities or commercial facilities within hotels, motels or bed &...
Page 6
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may use the appliance without supervision if its operation has been clearly explained to them and they are able to use it safely.
Page 7
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance.
Page 8
The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele approved service technician. Faulty components must only be replaced by genuine Miele spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
Page 9
Warning and Safety instructions Correct use You could burn yourself on the hot drawer or hot dishes. Protect your hands with heat-resistant pot holders or oven gloves when handling hot items. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burning yourself.
Page 10
Warning and Safety instructions The “Keeping food warm” function is designed to keep hot food warm and not to warm up cold food. Ensure food is sufficiently hot when placed inside the drawer. Bacteria can develop in certain foods if the temperature is too low. Make sure that you set a high enough temperature to keep food warm.
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
Overview ESW 7010, ESW 7110 a Anti-slip mat b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by pressing lightly on the drawer front.
Overview ESW 7020, ESW 7030, ESW 7120 a Anti-slip mat b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by pressing lightly on the drawer front. d Rack e Air vents...
Setting the duration Display/indicator lights f Duration 1h = 1 hour 2h = 2 hours 3h = 3 hours 4h = 4 hours g Temperature display with segment bars h Low temperature cooking i Keeping food warm j Warming plates/dishes k Warming cups/glasses l MobileStart activated m Optical interface (for Miele service technicians only)
Overview Accessories supplied The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see “Optional accessories”). Rack For increasing the loading area (ESW 7020, ESW 7030, ESW 7120). Anti-slip mat For keeping dishes secure.
Before using for the first time Remove any protective wrapping and Heating up the drawer for the stickers. first time Do not remove stickers carrying Heat the empty drawer for at least safety or installation information or 2 hours. the data plate.
Before using for the first time Miele@home availability Miele@home The ability to use the Miele@mobile App Your drawer is equipped with an depends on the availability of the integrated Wi-Fi module. Miele@home service in your country. In order to use it, you need: The Miele@home service is not available in every country.
Page 18
Before using for the first time Connecting via the app When requested to activate Wi-Fi on the drawer, proceed as follows: The Miele@mobile App can be used to connect to your network. Switch the drawer off. Install the Miele@mobile App on your ...
Page 19
The drawer can now be operated via the App. If the connection fails, you have probably not connected WPS on your router quickly enough. Repeat the steps above. Useful tip: If your Wi-Fi router does not support WPS, please connect via the Miele@mobile App.
Operation Open the drawer. Operating principles Switch the drawer on by touching the Malfunction due to dirty and/or sensor. covered sensor controls. Touch the sensor repeatedly until The sensor controls do not react or the required function lights up. unintentional switching procedures result, perhaps even automatic ...
Keeping food warm for a long time will light up. You will be able to operate can result in it drying out or even the drawer via the Miele@mobile App. self-igniting. Do not leave the drawer unattended Operation via the sensors has...
Operation Temperature settings Each operating mode has its own temperature range. The factory default recommended temperatures are printed in bold. The temperature can be altered in 5 °C increments by touching the sensor. The last temperature selected is automatically activated the next time the drawer is switched on, and shown in the display (exception: Low temperature cooking).
Keeping food warm Useful tips Health risk caused by using too low a temperature. To maintain your food's optimum quality please note the following: Bacteria may develop in the food if the temperature used for keeping – Place the hot food into pre-heated food warm is too low.
– The temperature setting more by placing one rack on the left and the other on the right. An additional rack can be obtained from the Miele online shop, or directly from Miele (see “Optional accessories”).
Pre-heat the drawer with the suitable cooking containers for 15 minutes. This If food probes from other Miele built- ensures that the dishes and the interior in appliances are used in the drawer, of the drawer reach the required they may affect the built-in temperature.
Page 30
Low temperature cooking Using the Low temperature Useful tips cooking function – Do not cook the food all the way through. Sear the food straight after Select the Low temperature cooking. cooking function. – The food can be sliced straight away. ...
Page 31
Low temperature cooking Pre-heat the cooking container for 15 minutes. In this time, rest the food at room temperature. Place the food into the pre-heated cooking container in the drawer. The durations given in the charts are guidelines only. The food can be cooked further if required.
Page 32
Low temperature cooking Pork cooking chart Cut of meat [min] * [°C] [min] Fillet 6–8 total 90–110 approx. 550 g Medallions 2 per side 85–100 approx. 4 cm thick * 65 °C well done Searing time/ Core temperature/ Duration/ Temperature setting Lamb cooking chart [min]...
Page 33
Low temperature cooking Fish cooking chart Type of fish [min] [°C] [min] Salmon 2 on the skin side 45–60 400 g Trout (whole) 2 per side 15–30 approx. 350 g ...
Carrying out the networking Networking is carried out via the Miele@mobile App as normal. See “Before using for the first time – Setting up Miele@home” as well as the Miele@mobile App for detailed information about this function. Operation via the sensors has precedence over operation via the App.
Sabbath mode For religious observance, the drawer can be programmed for the duration of the Sabbath. This mode switches off automatically after about 72 hours and the drawer resumes normal operation. When this function is activated, the timer is deactivated and the sensor controls must be touched for longer than usual.
Cleaning and care Risk of damage due to moisture Danger of burning on the hot ingress. interior! The steam from a steam cleaning The interior of the drawer will be hot appliance could reach electrical after use. components and cause a short Allow the drawer to cool down to a circuit.
Page 38
Cleaning and care Cleaning the drawer front and Cleaning the anti-slip mat interior Damage caused by incorrect cleaning. Malfunction due to dirty and/or Washing the anti-slip mat in a covered sensor controls. dishwasher or washing machine will The sensor controls do not react or damage it.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Page 40
Problem solving guide Problem Possible cause and remedy The function for warming plates and dishes has The crockery is not warm enough. not been selected. Select the correct function. The temperature setting is too low. Select a higher temperature. The air vents are covered.
These products can be ordered from the Miele online shop. They can also be ordered directly from Miele (see end of this booklet for contact details). Rack For increasing the loading area (ESW 7020, ESW 7030, ESW 7120).
The drawer may only be installed in combination with those appliances quoted by Miele as being suitable. If the drawer is used in combination with other appliances, the warranty will be invalidated, as trouble-free operation cannot be guaranteed.
Installation notes The drawer can be used in combination with the following Miele built-in appliances: – all 60 cm wide ovens – all 60 cm wide steam ovens – all 60 cm wide coffee machines – all 60 cm wide microwave ovens – the 60 cm wide Dialog oven The combination appliance is placed on top of the drawer without the need for an interim shelf.
Installation dimensions ESW 7010, ESW 7110 All dimensions in this instruction booklet are given in mm. Combination appliance with a height of 45 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7010, ESW 7110 Combination appliance with a height of 60 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7010, ESW 7110 Connections and ventilation a Front view b Mains connection cable, L = 2,000 mm c Ventilation cut-out, min. 180 cm d No connections permitted in this area...
Installation dimensions ESW 7020, ESW 7120 All dimensions in this instruction booklet are given in mm. Combination appliance with a height of 45 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7020, ESW 7120 Combination appliance with a height of 60 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7020, ESW 7120 Connections and ventilation a Front view b Mains connection cable, L = 2,000 mm c Ventilation cut-out, min. 180 cm d No connections permitted in this area...
Installation dimensions ESW 7030 All dimensions in this instruction booklet are given in mm. Combination appliance with a height of 45 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7030 Combination appliance with a height of 60 cm The furniture housing unit must not have a back panel fitted behind the building-in niche.
Installation dimensions ESW 7030 Connections and ventilation a Front view b Mains connection cable, L = 2,000 mm c Ventilation cut-out, min. 180 cm d No connections permitted in this area...
Installation Check that the base on which the drawer will sit is clean and level (use a spirit level). This is important for the appliance to function correctly. Push the drawer into the furniture unit up to the vapour strip and make sure it is correctly aligned in the unit.
Residual current device Danger of injury! Miele cannot be held liable for unauthorised For extra safety, it is advisable to installation, maintenance and repair protect the drawer with a suitable...
Page 58
Electrical connection Replacing the mains connection cable If replacing the mains connection cable, it must be replaced with a cable type H 05 VV-F (rubber insulated), available from Miele, by a suitably qualified and competent electrician.
Service Contact in case of fault In the event of any faults which you cannot remedy yourself, please contact Miele. Contact information for Miele can be found at the end of this booklet. Please quote the model and serial number of your appliance when contacting Miele.
Page 63
Miele Experience Centre South Melbourne: Freemans Bay, Auckland 1011 206-210 Coventry Street South Melbourne, VIC 3205 Miele Experience Centre Auckland: Miele Experience Centre and Office Sydney: 8 College Hill 3 Skyline Place Freemans Bay, Auckland 1011 Frenchs Forest, NSW 2086 Telephone:...