Network Configuration; Set The Initial Password - Huawei IPC6061-FP Quick Start Manual

IPC6061-FP
Quick Start Guide
You can initialize device and modify IP address on the Web interface. Please refer to the User
Manual in the disk for more details.

5.1 Set the Initial Password

5.2 Modify IP Address
5.3 Login Web Interface
5.1 Set the Initial Password
Step 1 In the address box of Internet Explorer, enter http://IPC IP address and press Enter.
The Device Initialization page is displayed, as shown in
Issue 01 (2019-02-22)
NOTE
l It needs to set the initial password if it is the first time use device or the device is restored to factory
default.
l It can access the camera web page only when the device IP address (192.168.0.120 by default) and
the IP address of PC are in the same network segment.
l In order to make the camera have access to network smoothly, please plan available IP segment
according to the actual network environment.
l The following figures are for reference only; different models may have different interfaces.
NOTE
192.168.0.120 is the default IP address of the camera.
Copyright © Huawei Technologies Co., Ltd.
5

Network Configuration

5 Network Configuration
Figure 5-1.
17