Display Test Procedure For Ecam23.420 Intensa - DeLonghi ECAM23.420 Service Manual

DISPLAY TEST PROCEDURE
To enter the DISPLAY test:
Plug the machine ON.
Press and hold: 1 Coffee + Steam buttons
Press On/Off Switch (position I)
Note: Release buttons after you read the
message "DISPLAY TEST MODE".
NOTE: After display Test performing, you need to intialize the machine.
To EXIT the procedure, press On/Off Swicth (position 0) or unplug the machine.
Test procedure ends automatically 1 minute after you completed it.
DISPLAY TEST PROCEDURE FOR
ECAM23.420 INTENSA
Turning the knob,
the display will show
the bar increasing
or decreasing.
Pressing each icon the display
will show following message
icon message
BUTTON 1
BUTTON 2
BUTTON 3
BUTTON 4
BUTTON 5
BUTTON 6
BUTTON 7