Safety Instructions; Safety Labelling; Signal Words In Accordance With Ansi - Beko METPOINT OCV Instructions For Installation And Operation Manual

Safety instructions

4 Safety instructions
In addition to these operating instructions, it is imperative to adhere to the relevant accident prevention
regulations, the generally accepted safety rules, the EU directives and country-specific standards and
provisions.
4.1

Safety labelling

Safety instructions whose non-observance represents a threat to life and physical condition or can lead
to property damage are labelled in accordance with DIN 4844 and ANSI Z535.
Safety pictograms in accordance with DIN 4844
General danger symbol
Compressed gas
Note
Observe operating instructions
Disconnect from voltage
4.2

Signal words in accordance with ANSI

Danger! Imminent hazard
Serious injury or death
Potential hazard
Warning!
Serious injury or death
Imminent hazard
Caution!
Injury or property damage
Notice! Potential hazard
Injury or property damage
Additional advice, info, hints
Important!
No danger
6 Measurement accessories METPOINT® OCV 40 bar