Transport And Set-Up - Beko METPOINT OCV Instructions For Installation And Operation Manual

Transport and set-up

7 Transport and set-up
IMPORTANT!
Danger through damaged components!
Under no circumstances should you start up damaged components. Defective
components can impair the operational reliability and cause further damage.
The function and service life of the METPOINT
with an operating pressure of 40 bar depends on the conditions at the place of installation. This place
must meet the following requirements:
1. Weather-proof and frost-free installation within a building.
2. The ambient temperature must not drop below or exceed the indications on the type plate.
3. The installation conditions in the separate installation and operating instructions need to be
observed and followed.
12
®
OCV in the version for the measurement in systems
Measurement accessories METPOINT® OCV 40 bar