Sonnenprotect 4000 (Optional) - Sonnen sonnenBatterie 10 Installation Instructions Manual

15.2 sonnenProtect 4000 (optional)

System data (AC)
Nominal power
Nominal frequency
Output voltage
Overload (30 min.)
Power factor range
Max. output current (duration/100 ms)
Short-circuit current
Network configuration in emergency op-
eration
Mains connection
Mains connection fuse
Operating concept
Switchover time
Threshold power
Dimensions/weight
Dimension (H/W/D) in cm
Weight in kg
Safety/protective
Protection class
devices
Degree of Protection
Overvoltage category
Required fault current monitoring
Ambient conditions
Environment
Pollution degree
Operating temperature range
Max. rel. humidity
Permissible installation altitude
Additional ambient conditions
KD-557 | 1000241 | EN | 02
sonnenProtect 4000
4,000 W
230/240 V
max. 4,600 W
0 capacitive ... 0 inductive
20 A / 23 A
single-phase, L / N / PE
Miniature circuit breaker | Type B | 20 A
Single-phase power supply via emergency circuit(s). The
switch to emergency operation takes place automatic-
ally through the storage system.
approx. 15 seconds
none (starting from 0 W)
52/23/12
approx. 10
Residual current device (RCD) with a rated differential
current of 300 mA; requirements on site must be ob-
served.
Indoor/Outdoor
-5 °C ... 50 °C
100%, condensing
2,000 m above sea level
The ambient conditions prescribed for the
storage system apply.
Technical data | 15
50 Hz
40 A
TN
II
IP65
2
3
91 / 100