Battery Status Indicators - Physio Control LIFEPAK 15 Service Manual

LIFEPAK 15 Monitor/Defibrillator
Service Manual

Battery Status Indicators

Home Screen
The Home Screen displays battery indicators that show the following information about the batteries installed in the device:
•
Presence or absence of battery in battery well
•
Battery in use
•
Battery charge state
When two batteries are installed, the device uses the battery with the lowest level of charge first. The battery in use is indicated by a white battery
number in a black box. When a battery reaches the "replace battery" state, the device automatically switches to the other battery.
provides a description of the various battery status indicators.
Table 7.1—Battery Status Indicator
Indicator Meaning
Active battery
Low battery
Very low battery
Section Menu
Description
The device is using the battery in Well 1 for power. Battery status indicators
display up to four green bars. Each green bar represents approximately 25%
remaining charge. For example, three green bars indicate about 75%
remaining charge.
Battery in Well 1 is in use and is low. One yellow bar indicates 5% to 10%
remaining charge.
Battery in Well 1 is in use and is very low. One red flashing bar indicates 0%
to 5% remaining charge. The device automatically switches to the other
battery only if adequate charge is available. If both batteries show red bars,
the REPLACE BATTERY voice prompt occurs.
Section Contents
Battery Maintenance
Battery Status Indicators
Back Index
7
Table 7.1
163