Huawei SUN2000-3KTL-M0 User Manual page 9

SUN2000-(3KTL-12KTL)-M0
User Manual
Operation
High voltage generated by the SUN2000 during operation may cause an electric shock, which
could result in death, serious injury, or serious property damage. Perform operations in strict
accordance with safety precautions specified in this document and other relevant documents.



Commissioning
When the SUN2000 is powered on for the first time, only qualified personnel are allowed to
set the parameters on Quick Setting . Incorrect settings may cause the SUN2000 to conflict
with the local certification, which affects the normal operation of the SUN2000.
Maintenance and Replacement
High voltage generated by the SUN2000 during operation may cause an electric shock, which
could result in death, serious injury, or serious property damage. Prior to maintenance, power
off the SUN2000 and strictly comply with the safety precautions in this document and
associated documents to operate the SUN2000.






Issue 01 (2018-12-30)
Before operating a device, ensure that it is properly grounded.
Do not touch an energized SUN2000, as the heat sink is hot.
Comply with local laws and regulations when operating a device.
A faulty SUN2000 requires overall maintenance. Contact your dealer if the SUN2000 is
faulty.
Maintain the SUN2000 with sufficient knowledge of this document, proper tools, and
testing equipment.
Before maintaining the SUN2000, power it off and follow the instructions on the delay
discharge label. Wait for a proper time to operate the SUN2000.
Place temporary warning signs or erect fences to prevent unauthorized access to the
maintenance site.
Rectify any fault that may compromise the SUN2000 security performance before
powering it on again.
Observe ESD precautions during maintenance.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
3