Disassembly; Cylinder Head - Yamaha TW200 Service Manual

4-5
DISASSEMBLY
I
ENG
I' ..
I
DISASSEMBLY
CYLINDER HEAD
NOTE: _
With the engine mounted, the cylinder head can
be maintained by removing the following parts.
-Seat
-Fuel tank
1. Remove:
- Cam sprocket cover
G)
2. Align:
-Slit mark
@
(Cam sprocket)
With the stational pointer
G)
on the cylinder
head.
Toe
alignment steps:
-Turn the crankshaft counterclockwise with
wrench.
- Align the slit mark
@
on the cam sprocket
with the stational pointer
G)
on the cylinder
head. When the slit mark is aligned with the
stational pointer, the piston is at Top Dead
Center (TDC).
3. Remove:
- Adjuster cap
G)
-Locknut
@
- Cam chain adjuster
®
-Spring
@
-Retainer
@
- Tensioner rod
®