Table of Contents
Advertisement
To turn on/off the estimation and sum-
mary display
On the [Estimation and Summary]
screen, touch [Initial Display] so that
the checkmark is removed to turn off
the estimation and summary display.
To turn the display on, touch [Initial
Display] again so that the checkmark
is added again.
Examples of estimation display and
summary display are shown below.
Example of an estimation display
●
●
Example of a summary display
●
●
Estimation display content
1. On the [Estimation and Summa-
ry] screen, touch [Arrival est].
The screen changes as follows.
2. Touch the desired content that
will be displayed during route
guidance.
You can select one from among
the following four options.
[Arrival time to Destination]
●
●
[Distance to Destination]
●
●
[Arrival time to Via point]
●
●
[Distance to Via point]
●
●
TIP
[Arrival time to Via point] and [Distance
to Via point] are available only when
one or more via points have been set.
11-28
SETTINGS
Summary display content
1. On the [Estimation and Sum-
mary] screen, touch [Summa-
ry].
The screen changes as follows.
2. Touch the desired content that
will be displayed during route
guidance.
You can select one from among
the following two options.
[Moving time]
●
●
[Avg Speed] (average speed)
●
●
11
Hide quick links:
Advertisement
Table of Contents
