Programming Examples - R&S FSVA3000 Series User Manual

®
R&S FSVA3000/ R&S
This command activates or deactivates the frequency sweep for the selected genera-
tor.
Suffix:
<si>
<gen>
Parameters:
<State>
Example:
SYSTem:COMPatible <Mode>
This command enables compatibility to other spectrum and signal analyzers by R&S.
Compatibility is necessary, for example, regarding the number of sweep points.
Note that this command is maintained for compatibility reasons only. Use the
SYST:LANG command for new remote control programs (see
on page 1159).
Parameters:
<Mode>
Example:

14.15 Programming Examples

Some advanced programming examples for complex measurement tasks are provided
here.
User Manual 1178.8520.02 ─ 01
®
FSV3000
.
irrelevant
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
SOUR:EXT:FREQ:SWE ON
Activates the frequency sweep for the external generator.
DEFault | FSU | FSP | FSQ | FSV
SYST:COMP FSP
Remote Commands
Programming Examples
SYSTem:LANGuage
1198