Mitsubishi Electric MELSEC iQ-R Series User Manual page 34

5.
Set the items in "Basic Setting" as follows.
[Navigation window]
6.
Write the set parameters to the CPU module. Then reset the CPU module or power off and on the system.
[Online] [Write to PLC]
■Setting the RJ71EIP91 (target)
Connect the engineering tool to the adapter-side CPU module and set the parameters.
The setting procedure is the same as steps 1 to 5 for the RJ71EIP91 (originator). ( Page 31 Setting the RJ71EIP91
(originator))
The setting items in "Basic Setting" are shown below.
7 COMMUNICATION EXAMPLE
32
7.1 Communication Example between RJ71EIP91 and EtherNet/IP Device
[Parameter] [Module Information] [RJ71EIP91] [Basic Setting]