Maintenance and Storage
•
Let the engine cool before storing and do not store
the machine near an open flame.
•
Position the machine on a level surface, set the
throttle to slow, and shut off the engine. Wait for
all movement to stop before adjusting, cleaning,
or repairing.
•
Clean debris from drives, mufflers, and the engine
to help prevent fires. Clean up oil or fuel spills.
•
Do not store fuel near flames or drain indoors.
•
Never allow untrained personnel to service the
machine.
•
Carefully release pressure from components with
stored energy.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Move left to start the
engine.
133-8062
125-4966
2. Move up to shut off the
engine.
•
Disconnect the spark plug before making any
repairs.
•
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Keep nuts and bolts tight. Keep equipment in
good condition.
•
Stop and inspect the equipment if you strike
an object. Make any necessary repairs before
restarting.
•
Use only genuine Toro replacement parts to
ensure that original standards are maintained.
decal133-8062
1. Kickback hazard—read the Operator's Manual before
performing maintenance.
decal125-4966
5
125-8181
decal125-8181