Toshiba e-STUDIO A Series Operator's Manual page 90

4.Using the IP Fax Function
Item name
Destination — Remote 1
4
5 Destination — Remote 2
90 Using the IP Fax Function from TopAccess
Network Path
When you select [SMB] as the protocol, enter the network path to the network
folder. For example, to specify the "users/scanned" folder in the computer
named "Client01", enter "\\Client01\users\scanned".
When you select [FTP] as the protocol, enter the directory in the specified FTP
server. For example, to specify the "ftp://192.168.1.1/user/scanned" FTP
folder in the FTP server, enter "user/scanned".
When you select [NetWare IPX/SPX] or [NetWare TCP/IP] as the protocol, enter
the folder path in the NetWare file server. For example, to specify the
"sys\scan" folder in the NetWare file server, enter "\sys\scan".
Login User Name
Enter the login user name to access an SMB server, an FTP server, or a
NetWare server, if required. When you select [FTP] as the protocol, an
anonymous login is assumed if you leave this box blank. You can enter up to
32 alphanumerical characters and symbols other than <, >, " (double
quotation), : (colon) and ; (semicolon). A user name with only a single space is
not possible.
Password
Enter the password to access an SMB server, an FTP server, or a NetWare
server, if required.
Retype Password
Enter the same password again for a confirmation.
[Execute] button
Tests the connection using the specified network settings to check if the
communications can be established.
Select this check box to save a received document to Remote 2. How you can
set this item depends on how the 2nd Folder has been set up in the [Save as
file] submenu in the [Setup] menu. If Remote 2 does not allow you to specify a
network folder, you can only select [Use Administrator Setting]. The protocol
and the network path are displayed below this item. If the Remote 2 allows
you to specify a network folder, you can specify the network folder settings.
See the description of the Remote 1 option for each item.
Description