Toshiba e-STUDIO A Series Operator's Manual page 20

3.Setting the IP Fax Function
Item name
14 Memory Transmission Report
15 Multi Transmission Report
16 RX End Tone
17 TX End Tone
20 Setting the IP Fax Function from TopAccess
Selects how to print a result report after a memory transmission.
 OFF — Select this to not print a memory transmission report.
 Always — Select this to print a memory transmission report with all page
images for each memory transmission completed.
 ON ERROR — Select this to print a memory transmission report with all
page images only when the memory transmission is not successfully
completed.
 Always (Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image for each memory
transmission completed.
 ON ERROR (Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image only when the memory
transmission is not successful.
Selects how to print a result report after a multi-address transmission.
 OFF — Select this to not print a multi-address transmission report.
 Always — Select this to print a multi-address transmission report with all
page images for each multi-address transmission completed.
 ON ERROR — Select this to print a multi-address transmission report with
all page images only when the multi-address transmission is not
successfully completed.
 Always — Select this to print a multi-address transmission report with the
1st page image for each multi-address transmission completed.
 ON ERROR (Print 1st Page Image) — Select this to print a multi-address
transmission report with the 1st page image only when the multi-address
transmission is not successful.
Selects how to sound the RX end tone after the completion of reception.
 OFF — The RX end tone does not sound.
 Print End — The RX end tone sounds at the completion of printing.
 Receive End — The RX end tone sounds at the completion of reception.
Selects how to sound the TX end tone after the completion of transmission.
 OFF — The TX end tone does not sound.
 Always — The TX end tone sounds at the completion of transmission.
 ON ERROR — The TX end tone sounds in the case of a transmission failure.
 Normal End — The TX end tone sounds at the normal completion of
transmission.
Description