Advertisement
CHAPTER 4 - Start-up and adjustment of the drive
With reference to standards on electromagnetic compatibility (see paragraph 3.3), a 6-wire
cable twisted and shielded two by two, 3x(2x0.25) shielded must be used for connection.
4.3.3 Power terminal NI
MANIU04.9607 GB 03/97
Terminal for size 223 (N1A)
CAUTION: lt is important to respect
phase sequence for connection to the
motor; if phases are exchanged, the
drive may not function.
Fig. 4-2
Terminal for size 224 (N1B)
Fig. 4-3
Page 4.9
Advertisement
