GE MDS RCL220 Manual page 28

RCL220_manual_v3-draft.doc
4. Set the Responding device (OCR) to data mode with COM2 DEFAULT=DATA MODE=DATA. Note:
after this point, when you power cycle the radio it will come up into data mode so that it is
ready to poll. To regain the console, type "+++" and then hit Enter.
5. Set the Poller application to match your Polling radio:
6. Set the Responder application to match your Responding radio:
05-XXXXA01 Version 3 Draft Page 28 of 79 9/20/2016