Committing Settings - ABB RELION REX640 Operation Manual

Section 5
Using Web HMI
5.13
70
GUID-474F95AB-AED1-412D-9661-7162768F316B V1 EN
Figure 58: Error indicating that the entered value is incorrect
If writing values fails, an error message is displayed.
GUID-1FD447D8-367B-4CD6-9D7A-051D55A925A6 V1 EN
Figure 59: Error indicating that the values were not written to the protection
relay
6. Commit the settings.

Committing settings

Editable values are stored either in RAM or a nonvolatile flash memory. The values
stored in the flash memory are in effect also after a reboot.
Some parameters have an edit-copy. If writing is cancelled, the values with an edit-
copy are immediately restored to the original value. The values without an edit-copy,
such as string values, are restored to the original value only after a reboot even though
the edited value is not stored in the flash memory.
1. After editing parameter values, click Write to Relay to put the values into the
protection relay's database for use.
The values are not stored to the flash memory.
1MRS759118 A
REX640
Operation Manual