Disposal Precautions; Transportation Precautions - Mitsubishi Electric MELSEC-Q Series User Manual

[STARTUP AND MAINTENANCE PRECAUTIONS]
● Shut off the external power supply for the system in all phases before
mounting or removing the module. Failure to do so may cause the module to
fail or malfunction.
● After the first use of the product, do not perform each of the following
operations more than 50 times (IEC 61131-2/JIS B 3502 compliant):
• Mounting/removing the module to/from the base unit
• Mounting/removing the terminal block to/from the module
Exceeding the limit may cause malfunction.
● Do not drop or apply any shock to the battery to be installed in the module.
Doing so may damage the battery, causing the battery fluid to leak inside the
battery. If the battery is dropped or any shock is applied to it, dispose of it
without using.
● Before handling the module, touch a grounded metal object to discharge the
static electricity from the human body.
Failure to do so may cause the module to fail or malfunction.

[DISPOSAL PRECAUTIONS]

● When disposing of the product, treat it as an industrial waste.
When disposing of batteries, separate them from other wastes according to
the local regulations.
(For details of the Battery Directive in EU member states, refer to QCPU-A (A
mode) User's Manual.)

[TRANSPORTATION PRECAUTIONS]

● When transporting lithium batteries, follow the transportation regulations. (For
details of the regulated models, refer to Chapter 7.)
CAUTION
CAUTION
CAUTION
A-7