Huawei EG860 Series User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Wireless Access Point
  5. EG860 Series
  6. User manual
Huawei EG860 Series User Manual

Huawei EG860 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

EG860
V200R003C00

User Guide

Issue
02
Date
2015-04-10
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei EG860 Series

Summary of Contents for Huawei EG860 Series

  • Page 1: User Guide

    EG860 V200R003C00 User Guide Issue Date 2015-04-10 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    2 Introduction This section describes functions, networking, and technical specifications of an EG860. 3 Hardware This section describes hardware components and cables of an EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. General Conventions Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5 For example, click OK. > Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 Press the primary mouse button twice continuously and quickly without moving the pointer. Drag Press and hold the primary mouse button and move the pointer to a certain position. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 7: Table Of Contents

    3.2.3 PGND Cable................................26 4 Installation............................28 4.1 Site Preparations................................29 4.2 Installation Preparations...............................30 4.3 Installation Procedure..............................32 4.3.1 Mounting an EG860 on a Pole..........................32 4.3.1.1 Mounting EG860 Equipment on a Pole........................34 Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 7.2.11 L2TP Settings................................90 7.2.12 FTP Settings................................90 7.2.13 Security access Settings............................91 7.3 Security Settings................................91 7.3.1 Firewall General................................91 7.3.2 MAC Filtering................................92 7.3.3 IP Filtering.................................93 7.4 NAT Settings................................94 7.5 QoS Management.................................95 Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 9 7.7.13 Work Frequency..............................104 7.7.14 SIM Configuration..............................105 7.7.15 Alarm Configuration..............................105 7.8 Logout..................................107 8 Alarm Reference........................108 8.1 ALM-50001 Lan state..............................109 8.2 ALM-50002 High Temperature..........................110 8.3 ALM 50003-RadioSignal Weak..........................111 9 Glossary............................113 Issue 02 (2015-04-10) Huawei Proprietary and Confidential viii Copyright © Huawei Technologies Co., Ltd.

  • Page 10: Change History

    This is the first release of the V200R003C00 version. Compared with issue V200R003C00 Draft C, the documentation does not contain any new information. Compared with issue V200R003C00 Draft C, the documentation includes the following changes: Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 11 Draft B (2014-11-11) This is the Draft B release of the V200R003C00 version. Compared with issue V200R003C00 Draft A, the documentation does not contain any new information. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Modified the default password of WebUI. 5.1.3 Configuring Transmission Data Added the configuration steps for L2TP. 7.2.1 SIM Card Settings Modified the steps for setting SIM card. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 7.2.3 DHCP Settings 7.2.4 WLAN Settings 7.2.5 WLAN Multi-SSID 7.2.7 Internet MTU 7.7.5 Password Change Compared with issue V200R002C00 05, the documentation deletes the following information. Reference>FTP Management Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 14: Introduction

    EG860 security includes network security and application security. Application security includes wireless security and OM security. 2.5 Certification Information This section describes the certification that EG860 has passed. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 15: Product Functions

    A government private network is a wired MAN that runs over existing optical cables and MSTP networks at the physical layer and adopts MPLS VPN architecture at the layer, to isolate different types of services that coexist over the same network. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16 The integrated network is shown as Figure 2-1. Figure 2-1 A government integrated network The networking of wireless networks is shown as Figure 2-2. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Technical Specifications

    Dimension Weight 240 mm (H) x 200 mm (W) x 61 mm (D) ≤ 2 kg Electrical specifications Table 2-2 lists the electrical specifications of an EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: Specifications

    832 MHz-862 MHz (uplink)/ 791 MHz-821 MHz (downlink) Carrier configuration 5 MHz/10 MHz/20 MHz Maximum transmit power 23 dBm±2 dBm Output frequency spectrum 3GPP TS 36.101-compliant template and stray specifications Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 In the fixed topology: 3MHz/ 5MHz/10MHz/20MHz In the vehicle-mounted communications system: 5MHz/10MHz/20MHz Maximum transmit power 25 dBm±2 dBm Output frequency spectrum 3GPP TS 36.101-compliant template and stray specifications Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Antenna Specifications

    Frequency Built-in Built-in 760MHz~870M 2400MHz~250 directional directional 0MHz antenna: antenna: 1447MHz~146 17857MHz~18 7MHz 05MHz External External antenna: antenna: 1350MHz~150 1710MHz~188 0MHz 0MHz Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 Wi-Fi omnidirectional antennas Table 2-7 Antenna specifications of EG860-D61 Item LTE Antenna (400M) Wi-Fi Antenna Mode External antenna Built-in omnidirectional antenna Frequency 380MHz~410MHz/ 2400MHz~2500MHz 410MHz~440MHz/ 440MHz~450MHz/ 380MHz~450MHz Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 ≤ 50 m/s Rainfall intensity 6 mm/min Rainwater temperature +5℃ Sand 1000 mg/m³ Earthquake intensity VIII or higher Table 2-9 lists the storage environment specifications of an EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Product Security

    For the EG860, the OM TCP applications can use SSL. HTTP over SSL is generally called HTTPS. HTTPS is used for connections between the NMS/WebUI and EG860. SSL also uses the digital certificate mechanism. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 24: Application Security

    – Users can change their own passwords. The old password must be verified when it is changed. – User accounts are locked when the number of consecutive password failures reaches a specified threshold. Password storage and transmission rules Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Om System Security

    Software integrity protection implements the Hash algorithm or adds a digital signature to software (including mediation layers and configuration files) when releasing software, and then Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 26: Digital Signature Of Software

    Then, the NE recalculates the message digest and compares the new message digest with the original one. – If the two message digests are the same, the software package passes the verification and can be used. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Certification Information

    RoHS is enforced in each member state of the European Union. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 28: Hardware

    This section describes the exterior, front panel, indicators, and ports of an EG860. 3.2 EG860 Cables This section describes the cables of an EG860, including power over Ethernet (PoE) cables, power cables and protection ground (PGND) cables. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Eg860 Hardware

    An EG860 has an FE port, a power port, external antenna ports, subscriber identity module (SIM) card window, indicators, a nameplate, and a ground screw on its front panel. Figure 3-2 shows the front panel of an EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 Data service port Receives/Transmits data services and supplies power to an EG860. Power port Connects to a power supply. External antenna port Connects to an external antenna. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 31: Indicators

    RSRP ranging between– 141 dBm and –105 dBm. Green Steady on An FE port is working properly. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 32: Ports

    Both ends of the cable that is used to connect the camera and adaptor are shielded RJ45 connectors and configured in compliance with the following requirements – Only one cable of this kind is used for each camera. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 Operating temperature -40℃~75℃ Minimum installation temperature -20℃ Actual highest operating voltage 100 V Actual highest operating voltage Power Adapter Figure 3-3 shows the appearance of a power adapter. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Power Cable

    3.2.2 Power Cable The power cable transmits 24V DC power. It applies only to the solar scenario. Appearance Figure 3-4 shows the appearance of a power cable. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Pgnd Cable

    6 mm . Both ends of the cable are OT terminals. If a PGND cable is self-provided, a copper-conductor cable with a cross- Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 Cross-sectional area 6 mm² (9 AWG) External diameter 5.1 mm ± 0.3 mm Operating temperature -25℃70℃ Storage temperature -40℃-50℃ Minimum installation temperature -10℃ Rated voltage 600 V Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 37: Installation

    4.3 Installation Procedure This section describes how to install an EG860 on a pole and wall. 4.4 Checking Installation Check hardware and power-on status of an EG860 after installation. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Site Preparations

    EG860 at least 600 mm higher than the record flood stage. Requirements for Installation Space To facilitate O&M, adhere to the following space requirements as shown in Figure 4-1. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 39: Installation Preparations

    Precautions Power on an EG860 within 24 hours after unpacking it. If you power off an EG860 for maintenance, restore power to the EG860 within 24 hours. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Installation Tools

    Ø14 and Ø12 drill bits) Flat-head Phillips screwdriver Crimping tool screwdriver (M2.5– (M2.5–M6) Socket wrench (M10) Rubber mallet Level Utility knife Torque wrench (5 N m–40 N·m) Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 41: Installation Procedure

    The following provides the requirements for installation space and components. Requirements for a mental pole of EG860 Figure 4-2 shows the requirements for a mental pole of EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42 2λ (c=λ*f). Figure 4-4 shows an EG860 and installation components. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Mounting Eg860 Equipment On A Pole

    This section describes how to mount EG860 equipment on a pole. Procedure Step 1 Optional: Open the EG860 card window and insert a card, as shown in Figure 4-5. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Figure 4-6 Assembling steel strapping tapes with the installation component Step 3 Install the assembled installation component on the EG860, with the torque being 48 kgf.cm, as shown in Figure 4-7. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Roll the steel strapping tapes on the pole, let them go through the bayonet, and buckle up the bayonet after proper adjustment, as shown in Figure 4-8. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 46 Use the inner hexagon tool to tighten the steel strapping tapes, with the torque being 48 kgf.cm, as shown in Figure 4-9. Figure 4-9 Tightening steel strapping tapes Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 Properly adjust the vertical angle and tighten the screws on the side of the installation component, with the torque being 120 kgf.cm and a maximum of 45 degrees adjustment, as shown in Figure 4-11. Figure 4-11 Vertical angle adjustment ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Connecting Cables To An Eg860 Mounted On A Pole

    Figure 4-12 Connecting the PGND cable to the EG860 Step 2 Install the cable. Loosen the PG connector at the port on the EG860. Figure 4-13 shows the structure of the connector. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49 PG connector and ensure that the lock nut, rubber seal, and connector are compact, as shown in Figure 4-14. Figure 4-14 Inserting a PoE cable into the PG connector Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50 Do not cut the tape until all the three layers of the tape are already wrapped. Wrap each layer of tape around the connector tightly. Bind the both ends of the tape by cable tie. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51 (provided by customer). Step 3 Optional: Connect the power cable. Screw the waterproof cover off the PWR connector, as shown in Figure 4-18. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Figure 4-19 Passing the power cable through the PWR connector and tightening the waterproof cover Connect the power cable to the EG860 and tighten the waterproof cover, as shown in Figure 4-20. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 53 The two antennas must be in the same horizontal position, with a minimal interval of 1.5 meters. Figure 4-21 DC for the central conductor Loosen the antenna connector, as shown in Figure 4-22. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 Optional: In outdoor scenarios, waterproof the connecting joints as shown in 2.4. Connect an external antenna through the DC for the central conductor, as shown in Figure 4-24 Figure 4-25. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55 EG860 User Guide 4 Installation Figure 4-24 Connecting an external antenna (single antenna) Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 56: Mounting An Eg860 On A Wall

    4.3.2 Mounting an EG860 on a Wall This section describes how to mount an EG860 in indoor scenarios. Context The following provides the requirements for installation space and components. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Mounting Eg860 Equipment On A Wall

    EG860 and installation components. Figure 4-27 EG860 and installation components 4.3.2.1 Mounting EG860 Equipment on a Wall This section describes how to mount EG860 equipment on a wall. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 Use a tweezer or a pair of needle-nose pliers to remove cards. Step 2 Install the installation component on the EG860, with the torque being 48 kgf.cm, as shown in Figure 4-29. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59 Step 3 Place a marking-off template against the wall, use a level to verify that the marking-off template is placed horizontally, and then mark anchor points with a marker, as shown in Figure 4-30. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60 Step 5 Align the installation holes in the bracket with the expansion bolt holes in the wall, fasten the nuts of the expansion bolts, and mount the EG860 on the wall, as shown in Figure 4-32. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 61: Connecting Cables To An Eg860 Mounted On A Wall

    4.3.2.2 Connecting Cables to an EG860 Mounted on a Wall This section describes how to connect cables to an EG860 mounted on a wall. Procedure Step 1 Connect the PGND cables, as shown in Figure 4-33. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 Figure 4-33 Connecting the PGND cable to the EG860 Step 2 Install the cable. Loosen the PG connector at the port on the EG860. Figure 4-34 shows the structure of the connector. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 63 PG connector and ensure that the lock nut, rubber seal, and connector are compact, as shown in Figure 4-35. Figure 4-35 Inserting a PoE cable into the PG connector Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64 Do not cut the tape until all the three layers of the tape are already wrapped. Wrap each layer of tape around the connector tightly. Bind the both ends of the tape by cable tie. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 65 (provided by customer). Step 3 Optional: Connect the power cable. Screw the waterproof cover off the PWR connector, as shown in Figure 4-39. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66 Figure 4-40 Passing the power cable through the PWR connector and tightening the waterproof cover Connect the power cable to the EG860 and tighten the waterproof cover, as shown in Figure 4-41. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 The two antennas must be in the same horizontal position, with a minimal interval of 1.5 meters. Figure 4-42 DC for the central conductor Loosen the antenna connector, as shown in Figure 4-43. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 68 Optional: In outdoor scenarios, waterproof the connecting joints as shown in 2.4. Connect an external antenna through the DC for the central conductor, as shown in Figure 4-45 Figure 4-46. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69 EG860 User Guide 4 Installation Figure 4-45 Connecting an external antenna (single antenna) Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 70: Checking Installation

    Check hardware and power-on status of an EG860 after installation. Prerequisites An EG860 has been properly mounted. Procedure Step 1 Check hardware installation. Complete the items for hardware installation listed in Table 4-2. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 PGND cable. The connectors of the cable are securely connected. The shield layer of the power cable is intact and the power cable is properly grounded. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72 Unused PG connectors are tightened and the protective covers of connectors are sealed. Step 2 Perform a power-on check by referring to Figure 4-47. Figure 4-47 EG860 power-on check procedure ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Configuration

    This section describes how to configure an EG860 through a web-based management interface. 5.2 Remote Configuration (Auto-configuration) EG860 supports the auto-configuration function. Auto-configuration deployment operations can be performed to EG860 on the NMS system. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Onsite Configuration (Webui)

    Retain the default parameter settings and no more configuration is required. To query the basic information about EG860, choose System > Device information. The information is displayed on the Device information tab. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 75: Configuring Transmission Data

    EG860s must not connect to the same switch. Table 5-1 lists relevant NEs and devices for parameter setting in different transmission modes. For detailed configuration for other NEs and devices, see corresponding manuals. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Devices attached to EG860 (such as sensor network gateways, cameras, and PCs) upload and download data through EG860. In addition, the server can also control the attached devices of EG860. Figure 5-1 shows typical application scenarios. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77 EG860 192.168.2.1 address allocated by the core network to 122.22.23.2 port on the EG860 address of the router 155.1.1.200 address of the video server 155.1.1.111 Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 78 155.1.1.111 Procedure Configure the four transmission modes as follows: (the configuration data is from the data plan Application Scenarios) Routing Behind MS Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79 The Protocol used for port mapping Remote Host address of – – – remote host Remote Port 1-8079 8080 8081-65535 The port Range number of remote host Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 80 Choose General Settings > Routing, the Routing page is displayed. In the Routing page, configure Static Routes based on the plan. For detailed configuration methods, see 7.2.8 Routing. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 81 Add to bridge Enable If this parameter is set to Enable, a BCP interface is added to the bridge to implement ETH over PPP over L2TPv2. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 82: Configuring Dedicates Bearers

    Users are advised to provide remote access as required. Locally accessing EG860 has fewer risks. Procedure The flowchart of remotely auto-configurable commissioning for EG860 using the eOMC910 is shown as Figure 5-2. See Table 5-10 for details. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 Obtain complete directory of TerminalConfData.xls configuration file from the EG860 software package, which contains the TerminalConfData.xls sheet and other files. Fill TerminalConfData.xls based on the actual service scenario. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84 Guide in eOMC910 Product configuration file for Documentation for details. commissioning NOTE After downloading the terminal configuration file, the EG860 user password will be set to the default password. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Maintenance

    Before maintaining an EG860, familiarize yourself with the site information, choose a maintenance task, and arrange tools and spare parts. 6.2 Powering on/off an EG860 Perform the following operations to power on or power off an EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 86: Preparations For Site Maintenance

    6.2 Powering on/off an EG860 Perform the following operations to power on or power off an EG860. Procedure Power on an EG860. Switch on the power supply connected to the EG860. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Remove the power cable to power off the EG860 in the cases of special scenarios such as device replacement and intended outages and emergencies that the EG860 generates electric sparks or smoke. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Reference

    The Web NMS offer the System menu to view and configure parameters such as Device Information, Reset, Backup & Recovery, and Upgrade. 7.8 Logout The login user interface is displayed upon a logout of the Web NMS. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 89: Status

    In Status, view the following information: IP and MAC: respectively displays the address and the address of the EG860. DHCP server: displays the status of the DHCP server configured on a router. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 90: Wlan

    Discarded: displays the number of discarded packets. NOTE Traffic statistics data are lost upon power-off of an EG860 but traffic is measured the next time the equipment is powered on. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 91: General Settings

    Different carriers have different access point name (APN) settings. If the APN parameters are incorrectly set, Internet service is inaccessible. Context Communicate with the carrier before configuring the APN. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 92 Step 3 Click APN Profile to add the APN. l An indicates an Internet access point provided by a carrier. Different carriers have different settings. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 93: Dhcp Settings

    Status indicates validity of all the preceding configurations. Done indicates that all the configurations are valid. Waiting indicates that the configurations will take effect upon restart. Step 5 Click Submit. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 94: Wlan Settings

    WPA encryption can be set to AES, TKIP, or TKIP+AES. AES is recommended. Step 4 Click Submit. ----End 7.2.5 WLAN Multi-SSID WLAN Multi-SSID allows four channels for Wi-Fi LAN access at different speeds based on customer and application requirements. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 95: Wlan Access Restrictions

    Internet within the WLAN. l If SSID1 MAC Access is set to Whitelist and the address list is empty, no Wi-Fi equipment has access to the Internet within the WLAN. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 96: Internet Mtu

    Static routes function similarly with dynamic routes except that static routes are manually created and always valid, and have higher priority than the dynamic routes. Step 3 Click Submit. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 97: Dedicated Context

    Configure DLGBR, ULGBR, DLMBR, and ULMBR as required. Step 3 Click Edit to configure the parameters in TFT. The related parameters are as follows: Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 98: Igmp Management

    Step 1 Choose General Settings > IGMP Management. The IGMP Management page is displayed. Step 2 Configure IGMP Management. IGMP Proxy can be set to Enable as required. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 99: L2Tp Settings

    Step 1 Choose General Settings > FTP Settings. The FTP Settings interface is displayed. Step 2 If FTP port is set to Enable, the FTP port is enabled. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 100: Security Access Settings

    MAC Address Filter + IP Address Filter The filter rule for both MAC address and IP address need to be configured. Make sure the MAC address and IP address correspond to each other. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 101: Mac Filtering

    Step 3 Click Submit. ----End Example Table 7-3 provides the typical whitelist parameter settings for address filter. Table 7-3 Typical whitelist parameter settings Index 00:1E:10:1F:04:05 00:E0:4C:98:58:98 D4:BE:D9:AF:F3:80 Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 102: Ip Filtering

    Table 7-4 Typical whitelist parameter settings Index Application name Source Address Destination Range Address Range Custom 192.168.71.5 192.168.71.10 Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 103: Nat Settings

    1 to 65535.When this parameter is null, by default, the Local Port and Remote Port Range are the same. For example, the value of Remote Port Range is 23, the value of Local Port is also23. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 104: Qos Management

    Each rule must match a service. A service can match a maximum of 32 rules. The related parameters are as follows: l Queue index: specifies the service that a rule matches. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 105: Vpn

    ASCII code; the characters must not be only digits or letters. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 106 – Phase 2 DH group: indicates the length of the phase 2 DH group, and can be set to 768bit, 1024bit, 1536bit, 2048bit, 4096bit, or null. – Phase 2 life cycle: value range: 60-86400; default value: 3600; unit: second Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 107: System

    Step 3 Optional: To recover factory defaults, click Restore. Recovering factory defaults will delete all the configuration parameters. ----End 7.7.3 Backup & Recovery Backup & Recovery allows backup and recovery of user configuration files. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 108: Upgrade

    Password Change page. Context The new password must meet password complexity requirements. The new password must not be one of the 3 passwords that are recently used. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 109: Password Complexity

    Step 1 Choose System > Password Complexity. The Password Complexity interface is displayed. Step 2 Set the password complexity rules in Config Password Complexity. Step 3 Click Submit. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 110: Password Security Settings

    Packet Stat displays the number of packets received/transmitted at a port. WAN ICMP controls whether to discard the ICMP packets received at the WAN port. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 111 If Method is set to WAN ICMP, and WAN ICMP is set to Enable, the WAN ICMP function is switched on. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 112: Log

    Only when Heat status is set to Enable, and the temperature is -10℃ or below, will the heating film activate to heat EG860. Otherwise, the heating film will not be activate to heat. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 113: Bandinfo Number Configuration

    Step 2 Set BandID. The value range is 0-63. 0 indicates that the frequency is not locked. Step 3 Set Frequency. The value range is 0-65535. 0 indicates that the frequency is not locked. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 114: Sim Configuration

    The basic information of EG860 alarms is as follows: Alarm Name Alarm ID Alarm Type Alarm Severity the Alarm 50001 Communication Critical Configuration of Lan alarm state Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 115 In the Alarm Configuration of High Temperature, the value range of AlarmReportTh and AlarmResumeTh are 20 ℃~80 ℃, set AlarmReportTh and AlarmResumeTh with a difference of more than 10 ℃. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 116: Logout

    The login user interface is displayed upon a logout of the Web NMS. Procedure Step 1 Click Logout. Step 2 In the displayed Are you sure you want to log out dialog box, click OK. ----End Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 117: Alarm Reference

    This alarm is reported when the temperature of an EG860 exceeds a preset threshold. 8.3 ALM 50003-RadioSignal Weak This alarm is reported when the signals received by an EG860 are weak. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 118: Alm-50001 Lan State

    Equipment A connection fault occurs on the device connected to the EG860. Procedure Check the network cable connection between the EG860 and the device connected to it. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 119: Alm-50002 High Temperature

    Configuration The alarm threshold is set to an inappropriate value. Procedure Check whether any heat sources or devices that affect ambient temperature exist. Query the alarm threshold. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 120: Alm 50003-Radiosignal Weak

    EG860 is normal. Check the signal strength in the cell in which the EG860 resides. To perform this check, log in to the WebUI and choose System > Diagnosis. Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 121 EG860 User Guide 8 Alarm Reference Related Information None Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 122: Glossary

    File Transfer Protocol FTPS File Transfer Protocol over SSL Global Positioning System Identifier Internet Explorer IP Multimedia Subsystem IMSI International Mobile Subscriber Identity Internet of Things Internet Protocol Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 123 Quality of Service Radio Frequency RoHS Restriction of the Use of Certain Hazardous Substances RSRP Reference Signal Received Power Specific Absorption Rate Synchronous Digital Hierarchy Session Description Protocol Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 124 Universal Serial Bus Virtual Private Network Wide Area Network WebUI Web User Interface Wi-Fi Wireless Fidelity WLAN Wireless Local Area Network Windows Media Audio Wi-Fi Protected Setup Issue 02 (2015-04-10) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Eg860-d61Eg860-c71

Table of Contents