Removing The Upper Tray Last Paper Sensor (S11); Removing The Low Tray Empty Sensor (S12) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray empty sensor (S12)

Removing the Upper tray last paper sensor (S11)

5) Remove two screws to remove the tray lower cover (small).
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover open/close
angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)

Removing the Low tray empty sensor (S12)

6) Remove four screws to remove the tray lower cover (large).
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover
open/close angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)
5) Remove the lower tray unit.
(Refer to:4-12)
4 Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray empty sensor (S12)
x2
x4
F-4-67 F-4-67
6) Remove one connector to remove the Upper tray last paper
sensor.
x1
F-4-65 F-4-65
7) Remove four screws to remove the tray lower cover (inner).
x4
4-29
F-4-66 F-4-66
F-4-68 F-4-68
4-29