Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter separation roller (upper)
Removing the Inserter pickup roller (lower)
4) Remove two resin E-rings to remove two
1) Remove the rear cover.
(Refer to:4-9)
(lower).
2) Increase the top cover open/
close angle.
(Refer to:4-9)
3) Increase the middle guide open/
close angle.
(Refer to:4-10)
Removing the Inserter separation roller (upper)
3) Remove five screws to remove the transfer guide.
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover open/
close angle.
(Refer to:4-9)
4
Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter separation roller (upper)
inserter pickup rollers
F-4-29
F-4-29
x5
F-4-30
F-4-30
4) Remove two E-rings and one bearing to remove the