Removing The Inserter Separation Roller (Lower); Removing The Inserter Feed Roller (Upper) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter feed roller (upper)

Removing the Inserter separation roller (lower)

4) ) Remove five screws to remove the transfer guide.
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover open/
close angle.
(Refer to:4-9)
3) Increase the middle guide
open/close angle.
(Refer to:4-10)

Removing the Inserter feed roller (upper)

3) Remove one spring, two resin E-rings, and two
1) Remove the rear cover.
(Refer to:4-9)
earings to remove the pickup roller unit.
2) Increase the top cover open/
close angle.
(Refer to:4-9)
4
Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter feed roller (upper)
5) Remove two E-rings and one bearing to remove the
x5
F-4-32 F-4-32
4) Remove one spring, two resin E-rings, and two
x2
F-4-34 F-4-34
lower
inserter separation roller ( ).
F-4-33 F-4-33
earings to remove the pickup roller unit.
F-4-35 F-4-35
5) Remove three E-rings, one pickup roller, and one lever to
nserter feed roller (upper).
remove the i
4-17
F-4-36 F-4-36
4-17