Polaris RZR XP TURBO S 2019 Owner's Manual For Maintenance And Safety page 189

1. Place the transmission in PARK.
2. Stop the engine. Turn the key back on to the accessory or ON position
without starting the engine. Slowly release the brake pedal and make sure
the transmission is in PARK before exiting the vehicle, verifying that the
PARK position is shown on the display.
3. Prior to securing the vehicle, the key switch must remain in the ON position,
the suspension mode switch must be in the COMFORT setting, and the
demo mode timeout must not be active while securing the vehicle. Shock
damping settings can be verified on the Suspension visualization screen.
4. Secure the vehicle.
Vehicles equipped with DYNAMIX active suspension must be powered on, set
to COMFORT mode, and properly functioning in order to ensure the shocks
are operating at their minimum compression damping setting prior to securing
the vehicle for transport. Failure to ensure the shocks are in their minimum
compression damping setting prior to securing the vehicle can potentially lead
to a reduction of intended strap tension while trailering.
5. After the vehicle has been secured, verify the gauge indicates PARK, and
turn the vehicle power off. Verify also that the suspension compression
damping values are still soft after securing the vehicle. If after securing the
suspension demo mode has timed out or the suspension has moved to a
FIRM setting as indicated on the Suspension control screen, cycle the key
switch, place the mode switch in COMFORT mode, and re-tighten the straps
per step number 3.
6. Remove the key to prevent loss during transporting. Secure the fuel cap and
seats. Ensure that the seats are attached correctly and are not loose.
Cargo and other loose vehicle parts may fly off while transporting this vehicle.
Secure or remove all cargo, and inspect the unit for loose parts prior to
7. Always tie the frame of the POLARIS vehicle to the transporting unit securely
with suitable straps or rope. Do not attach tie straps to the front control arm
bolt pockets.
WARNING
WARNING
transport.
MAINTENANCE
187