Summary of Contents for Polaris Sportsman 850 Touring
Page 1
PMS 419 Sportsman 550 Touring Sportsman 850 Touring Owner's Manual for Maintenance and Safety Read this manual carefully. It contains important safety information. This is an adult vehicle only. Operation is prohibited for those under 16 years of age.
Page 2
WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. A card containing important ATV safety information should be attached to the owner's manual on the next page. If you cannot locate this card, or if it has been removed, please call 1-800- 342-3764 for assistance.
Page 3
The text is printed on 100% recycled with 40% post-consumer waste (PCW).
Page 4
READ OWNER'S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. For your nearest Polaris dealer, call 1-800-POLARIS or visit www.polarisindustries.com Polaris Sales Inc., 2100 Hwy 55 Medina, MN 55340 Phone 1-888-704-5290 Part No. 9922730 Rev 01 Printed in USA *9922730...
Page 5
• Victory Motorcycles ® • Low emission vehicles (LEVs) We believe POLARIS sets a standard of excellence for all utility and recreational vehicles manufactured in the world today. Many years of experience have gone into the engineering, design, and development of your POLARIS vehicle, making it the finest machine we’ve ever pro-...
Page 6
POLARIS, THE WAY OUT and SPORTSMAN are registered trademarks of POLARIS Industries Inc. Copyright 2010 POLARIS Sales Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrep- ancies may result between the actual vehicle and the information presented in this publi- cation.
INTRODUCTION The following signal words and symbols appear throughout this manual and on your vehicle. Your safety is involved when these words and sym- bols are used. Become familiar with their meanings before reading the manual. The safety alert symbol indicates a potential personal injury hazard. WARNING A WARNING indicates a hazardous situation which, if not avoided, may result in death or serious injury.
Page 9
Failure to heed the warnings and safety precautions contained in this manual can result in severe injury or death. A POLARIS ATV is not a toy and can be hazardous to operate. This vehicle handles differently than other vehicles, such as motorcycles and cars.
Record your vehicle's identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. An ignition key can be duplicated only by ordering a POLARIS key blank (using your key number) and mating it with one of your existing keys.
ATV safety training is a top priority for POLARIS. POLARIS strongly encourages you and any family members who will be riding the ATV to take a training course. If you purchased a new POLARIS ATV in the United States, your dealer provided information about the authorized ATV RiderCourse that is available to you and your eligible family members.
Boots Helmet Wearing a helmet can prevent a severe head injury. Whenever riding a POLARIS vehicle, always wear a helmet that meets or exceeds estab- lished safety standards. Approved helmets in the USA and Canada bear a U.S. Department of Transportation (DOT) label.
Riding pants with kneepads and a jersey with shoulder pads provide the best protection. Equipment Modifications We strongly recommend that consumers do not install on a POLARIS ATV any equipment that may increase the speed or power of the vehicle, or make any other modifications to the vehicle for these purposes.
SAFETY Safety Warnings WARNING Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which may result in serious injury or death. Heed all safety warnings outlined in this section of the owner’s manual. See the OPERATION section of the owner’s manual for proper operating procedures.
SAFETY Safety Warnings Handling Gasoline Gasoline is highly flammable and explosive under certain conditions. • Always exercise extreme caution whenever handling gasoline. • Always refuel with the engine stopped, and outdoors or in a well ventilated area. • Do not smoke or allow open flames or sparks in or near the area where refueling is performed or where gasoline is stored.
SAFETY Safety Warnings Protective Apparel Riding in this vehicle without wearing an approved helmet and protective eyewear increases the risk of a serious injuries in the event of an accident. Operator and passenger must always wear an approved helmet that fits properly and eye protection (goggles or face shield).
SAFETY Safety Warnings Operating on Pavement Operating an ATV on paved surfaces (including sidewalks, paths, parking lots and driveways) may adversely affect the handling of the ATV and could result in loss of control and accident or overturn. Avoid operating the ATV on pavement. ATV tires are designed for off-road use.
SAFETY Safety Warnings Physical Control of the ATV Removing even one hand or foot can reduce ability to control the vehicle or could cause loss of balance and ejection from the ATV. If a person's feet are not firmly planted on the footrests, they could come into contact with the wheels or other moving parts and lead to accident or injury.
SAFETY Safety Warnings Improper Hill Climbing Improper hill climbing could cause loss of control or overturn. Always follow proper procedures for climbing hills as described in the owner's manual. See page 63. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. Descending Hills Improperly Improperly descending a hill could cause loss of control or overturn.
SAFETY Safety Warnings Stalling While Climbing a Hill Stalling, rolling backwards or improperly dismounting while climbing a hill could cause an overturn. • Always maintain a steady speed when climbing a hill. • Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill.
SAFETY Safety Warnings Operating on Slippery Terrain Failure to use extra caution when operating on excessively rough, slippery or loose terrain could cause loss of traction, loss of control, accident or overturn. Do not operate on excessively rough, slippery or loose terrain until you've learned and practiced the skills necessary to control the ATV on such terrain.
SAFETY Safety Warnings Improper Tire Maintenance Operating this ATV with improper tires or with improper or uneven tire pressure could cause loss of control or accident. Always use the size and type of tires specified for your ATV. Always maintain proper tire pressure as described in the owner's manual and on safety labels.
SAFETY Safety Warnings Operating Through Deep Water Operating the ATV through deep or fast- flowing water could cause the tires to float, causing loss of control or overturn. Avoid operating the ATV through deep or fast-flowing water. If it's unavoidable to enter water that exceeds the recommended maximum depth (see page 68):...
SAFETY Safety Warnings Operating on Frozen Bodies of Water Operating on frozen bodies of water may result in serious injury or death if the ATV and/or riders fall through the ice. Never operate the ATV on a frozen body of water unless you have independently verified that the ice is sufficiently thick to support the weight and moving force of the...
SAFETY Safety Warnings Operating a Damaged ATV Operating a damaged ATV can result in an accident. After any overturn or accident, have a qualified service dealer inspect the entire machine for possible damage, including (but not limited to) brakes, throttle and steering systems. Physical Skills Safe operation of this rider-active vehicle requires good judgement and physical skills.
If an informational or graphic label becomes illegible or comes off, con- tact your POLARIS dealer to purchase a replacement. Replacement safety labels are provided by POLARIS at no charge. The part number is printed on the label. Reverse Override Warning/AWD Caution...
Page 27
SAFETY Safety Labels and Locations General Warning WARNING Improper ATV use can result in SEVERE INJURY or DEATH ALWAYS USE AN APPROVED HELMET AND PROTECTIVE GEAR FOR DRIVER AND PASSENGER NEVER USE ON PUBLIC ROADS NEVER CARRY MORE THAN 1 PASSENGER NEVER USE WITH DRUGS OR ALCOHOL NEVER operate: •...
Page 28
SAFETY Safety Labels and Locations Passenger Warning/Discretionary Warning WARNING PASSENGER SAFETY To reduce the risk of SEVERE INJURY or DEATH NEVER CARRY MORE THAN ONE PASSENGER NEVER RIDE AFTER USING DRUGS OR ALCOHOL Passenger Warning Discretionary Warning NEVER carry a passenger too small to firmly plant feet on footrests and securely grasp hand holds.
SAFETY Safety Labels and Locations Rack/Box Rack/Box Warning Warning Hitch Capacity Label Clutch Cover Warning (under seat) Rack/Box Warning WARNING • DO NOT TOW FROM RACK OR BUMPER. Vehicle damage or tipover may result causing severe injury or death. Tow only from tow hooks or hitch. •...
FEATURES AND CONTROLS Switches Headlight Switch Switch Mode/Reverse Override Switch Main Key Engine Switch Stop Switch Mode/Reverse Override Switch This vehicle is equipped with a reverse speed limiter system.To gain additional wheel speed while backing, release the throttle and depress the override button.
FEATURES AND CONTROLS Switches Engine Stop Switch Move the stop switch either left or right to the OFF position to stop the engine quickly. Move the stop switch to the RUN position before attempt- ing to start the engine. The engine will not start or run when the switch is off.
The throttle lever is spring loaded. Engine speed returns to idle when the lever is released. This ATV is equipped with POLARIS Electronic Throttle Control (ETC), which is designed to reduce the risk of a frozen or stuck throttle.
FEATURES AND CONTROLS Brake Lever WARNING Operating the ATV with a spongy brake lever can result in loss of braking, which could cause an accident. Never operate the ATV with a spongy-feeling brake lever. Always contact your dealer for service before operating the vehicle. Squeeze the brake lever toward the handlebar to apply the front and rear brakes.
Page 34
FEATURES AND CONTROLS Master Cylinder/Brake Fluid WARNING An over-full master cylinder may cause brake drag or brake lock-up, which could result in an accident. Maintain brake fluid at the recommended level. Do not overfill. Never store or use a partial bottle of brake fluid. Brake fluid is hygroscopic, meaning it rapidly absorbs moisture from the air.
FEATURES AND CONTROLS Parking Brake Locking the Parking Brake 1. Place the transmission in PARK. 2. Squeeze and release the brake lever two or three times, then squeeze and hold. 3. Push the parking brake lock forward to engage the lock. 4.
Page 36
FEATURES AND CONTROLS Auxiliary Foot Brake WARNING Never back down a hill. Applying the auxiliary brake when backing down a hill may cause rear tipover, which could result in serious injury or death. Use caution when applying the auxiliary brake. Do not aggressively apply the auxiliary brake when going forward.
Page 37
FEATURES AND CONTROLS Automatic Transmission Gear Selector The transmission gear Gear selector is located on the Selector right side of the vehicle. H: High Gear L: Low Gear N: Neutral R: Reverse P: Park To shift gears, brake to a complete stop.
Test the seat latch by attempting to pull the seat upward. If the lock-out is not working properly, do not allow a passenger to ride the vehicle. See your POLARIS dealer for ser- vice. See pages 95-96 for passenger seat adjustment procedures.
FEATURES AND CONTROLS Fuel Tank Always refuel with the engine Fuel Tank stopped, and outdoors or in a well ventilated area. Refuel on a level surface. Remove the fuel tank cap and add fuel. Use either leaded or unleaded gasoline with a minimum pump octane number of 87=(R+ M/2) octane.
Page 40
FEATURES AND CONTROLS Front Storage Box Open the front storage box to access the under-compartment area. 1. Release the front box cover latches and lift the cover. 2. Release the plunger latches that secure the box to the frame. 3. Close the cover and Cover Latches Plunger Latches lift the unlatched...
FEATURES AND CONTROLS All Wheel Drive System The All Wheel Drive system is ADC 4X4 controlled by the 4X4 switch. ADC 4X4 Mode When the switch is on ADC 4X4, the ADC system allows engine braking to all four wheels when the vehicle descends a hill or incline.
FEATURES AND CONTROLS All Wheel Drive System Engaging 4X4 The 4X4 switch may be turned on or off while the vehicle is moving. Initially, the vehicle's electronic system will not enable 4X4 until the engine RPM is below 3100. Once enabled, 4X4 remains enabled until the 4X4 switch is turned off.
FEATURES AND CONTROLS Active Descent Control (ADC) System The ADC system allows engine braking to all four wheels when the vehicle descends a hill or incline. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. Engaging Active Descent Control The ADC system will automatically engage when all four of the follow- ing conditions occur:...
FEATURES AND CONTROLS Instrument Cluster NOTICE: High water pressure may damage ATV components. Wash the ATV by hand or with a garden hose using mild soap. Certain products, including insect repellents and chemicals, will damage the speedometer lens and other plastic surfaces. Do not use alcohol to clean the instrument cluster.
ON position and goes off when the engine is started. If the light remains on after starting the engine, the EPS system is inoperative. See your authorized POLARIS dealer for service. Neutral This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position.
Page 46
If this occurs, take the ATV to your POLARIS dealer for proper diagnosis. The information center is set to display standard units of measurement and a 12-hour clock at the factory.
FEATURES AND CONTROLS Instrument Cluster Digital/Analog Gauge Rider Information Center 1. Gear Display - This area displays gear shifter position. H = High Gear L = Low Gear N = Neutral R = Reverse Gear P = Park -- = Gear Signal Error (or shifter between gears) 2.
Page 48
FEATURES AND CONTROLS Instrument Cluster Digital/Analog Gauge Rider Information Center The reverse override button acts as the MODE button when pressed and released quickly. The transmission cannot be in reverse when using the override button as a MODE button. This feature does not contain a vehi- cle speed lockout function and can be used at any operating speed.
Page 49
FEATURES AND CONTROLS Instrument Cluster Digital/Analog Gauge Rider Information Center Clock Mode Tip: The clock must be reset any time the battery has been disconnected or dis- charged. 1. Turn the key to the ON position. Use the MODE button to toggle to the odometer display.
Page 50
Diagnostic Display Mode The EFI diagnostic display mode is for informational purposes only. Please see your POLARIS dealer for all major repairs. The diagnostic mode is accessible only when the check engine warning indicator activates after the key has been turned on. Leave the key on if you want to view the active code (failure code).
Page 51
4. Press the MODE button to advance to the next error code. 5. Press and hold the MODE button to exit the diagnostics code menu. 6. See pages 48-51 for code definitions and failure descriptions. Please see your Polaris dealer for all major repairs.
Page 52
FEATURES AND CONTROLS Instrument Cluster Diagnostic Display Code Definitions Open Load: There is a break in the wires that lead to the item listed in the chart (injector, fuel pump, etc.), or the item has failed. Short-to-Ground: The wire is shorted to ground between the electronic control unit and the item listed in the chart.
Page 53
FEATURES AND CONTROLS Instrument Cluster Diagnostic Display Code Definitions SPORTSMAN 550 Touring Diagnostic Codes Component Condition Idle Air Control Driver Circuit Grounded 520193 Shorted Load* 520193 Starter Enable Circuit Driver Circuit Short to B+ 1321 All Wheel Drive Control Driver Circuit Short to B+ 520207 System Power Voltage Too High...
Page 54
FEATURES AND CONTROLS Instrument Cluster Diagnostic Display Code Definitions SPORTSMAN 850 Touring Diagnostic Codes Component Condition Throttle Position Sensor Voltage Too High Voltage Too Low Engine Temperature Sensor Voltage Too High Voltage Too Low Temperature Too High Engine Overheat Shutdown...
Page 55
FEATURES AND CONTROLS Instrument Cluster Diagnostic Display Code Definitions SPORTSMAN 850 Touring Diagnostic Codes Component Condition Chassis Relay Driver Circuit Open/Grounded 520208 Driver Circuit Short to B+ 520208 Driver Circuit Grounded 520208 All Wheel Drive Control Driver Circuit Open/Grounded 520207...
Break-In Period The break-in period for your new POLARIS ATV is the first ten hours of operation, or the time it takes to use the first two full tanks of gaso- line. No single action on your part is as important as following the pro- cedures for a proper break-in.
Page 57
OPERATION Break-In Period Engine and Drivetrain Break-in 1. Fill the fuel tank with gasoline. See page 35. Always exercise extreme caution whenever handling gasoline. 2. Check the engine oil level on the dipstick. See page 81. Add oil if necessary to maintain the level between the safe and add marks. 3.
Page 58
OPERATION Pre-Ride Checklist Failure to inspect and verify that the ATV is in safe operating condition before operating increases the risk of an accident. Always inspect the ATV before each use to make sure it's in safe operating condition. Item Remarks Page Passenger seat latch...
OPERATION Safe Operation Practices 1. Complete the recommended safety training before operating this vehicle. See page 7. 2. Do not allow anyone under 16 years of age to operate this vehicle. Do not allow anyone with cognitive or physical disabilities to oper- ate this vehicle.
Respect the environment in which you ride. Find out where the designated riding areas are by con- tacting your POLARIS dealer, a local riding club or local officials. Help keep our trails open for recreational vehicle use. As an off-road enthusiast, you represent the sport and can set a good example (or a poor example) for others to follow.
OPERATION Starting the Engine 1. Position the vehicle on a level surface outdoors or in a well-venti- lated area. 2. Place the transmission in PARK. 3. Lock the parking brake. Tip: The starter interlock will prevent the engine from starting if the transmission is in gear and the brake is not engaged.
OPERATION Driving Procedures 1. Wear protective riding gear. See page 8. 2. Perform the pre-ride inspection. See page 54. 3. Place the transmission in PARK. 4. Lock the parking brake. 5. Mount the vehicle from the left side. 6. Sit upright with both feet on the footrests and both hands on the handlebars.
OPERATION Turning the Vehicle Both rear wheels drive equally at all times. This means that the outside wheel must travel a greater distance than the inside wheel when turning, and the inside tire must slip traction slightly. 1. Slow down. 2.
OPERATION Driving with a Passenger 1. Never allow anyone under 12 years of age to ride as a passenger on this 2-up ATV. Make sure any passenger is tall enough to comfort- ably and safely reach the grab handles and footrests. 2.
Page 65
OPERATION Driving with a Passenger 11. Ride to the ability of your passenger, instead of to your own ability. Avoid unexpected or aggressive maneuvers that could cause a pas- senger to fall from the vehicle. 12. Do not cross a hillside with a passenger on board. See page 64. 13.
OPERATION Driving on Slippery Surfaces Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions: 1. Do not operate on excessively rough, slippery or loose terrain. 2. Slow down when entering slippery areas. 3.
OPERATION Driving Uphill 15° Maximum Braking and handling are greatly affected when operating in hilly ter- rain. Improper procedure could cause loss of control or overturn. When- ever traveling uphill, follow these precautions: 1. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill.
Page 68
OPERATION Driving on a Sidehill (Sidehilling) Driving on a sidehill is not recommended. Improper procedure could cause loss of control or overturn. Avoid crossing the side of any hill unless absolutely necessary. If crossing a sidehill is unavoidable, follow these precautions: 1.
OPERATION Driving Downhill 15° Maximum When driving downhill, follow these precautions: 1. Always check the terrain carefully before descending a hill. 2. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. See page 39. 3. Always descend a hill with the transmission in forward gear. Do not descend a hill with the transmission in neutral.
Page 70
OPERATION Turning Around on a Hill (K-Turn) If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn around. 8 ft. (2.4 m)
Page 71
OPERATION Turning Around on a Hill (K-Turn) 1. Stop and lock the parking brake while keeping body weight uphill. 2. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. See page 39. 3. Leave the transmission in forward and shut off the engine. 4.
OPERATION Driving Through Water Your ATV can operate through water with a maximum recommended depth equal to the bottom of the footrests. Follow these procedures when operating through water: 1. Determine water depths and current before entering water. 2. Choose a crossing where both banks have Maximum Depth gradual inclines.
OPERATION Driving Over Obstacles Follow these precautions when operating over obstacles: 1. Always check for obstacles before operating in a new area. 2. Look ahead and learn to read the terrain. Be constantly alert for haz- ards such as logs, rocks and low hanging branches. 3.
OPERATION Driving in Reverse Follow these precautions when operating in reverse: 1. Always check for obstacles or people behind the vehicle. Be aware that a passenger can obstruct your view. 2. Always avoid backing downhill. 3. Back slowly. 4. Apply the brakes lightly for stopping. 5.
OPERATION Parking on an Incline Avoid parking on an incline if possible. If it's unavoidable, follow these precautions: 1. Stop the engine. 2. Place the transmission in PARK. 3. Lock the parking brake. 4. Always block the rear wheels on the downhill side.
OPERATION Hauling Cargo WARNING Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability, which can result in serious injury or death. Always follow these precautions when hauling cargo: Never carry cargo on the rear rack when operating the ATV in the 2-up mode with a passenger.
Page 77
OPERATION Hauling Cargo Never exceed the weight capacities specified for your ATV on warning labels and in the specifications sec- tion of this manual. 1. Cargo weight should be evenly distributed (1/3 on the front rack and 2/3 on the rear rack) and mounted as low as possible.
ATV warranty. Never install a hitch longer than 4" (10 cm). Never install automotive accessories on your POLARIS ATV. Always install POLARIS-approved (or equivalent) accessories designed for ATV use. Maximum Towing Capacities Do not exceed maximum towing capacities. Avoid towing on inclines.
CFR 205) and local noise level requirements. Operation on Public Lands in the U.S.A. Your POLARIS vehicle has a spark arrestor that was tested and quali- fied to be in accordance with the USFS standard 5100-1c. Federal law requires that this spark arrestor be installed and functional when the vehicle is operated on public lands.
Inspect, clean, lubricate, adjust and replace parts as nec- essary. When inspection reveals the need for replacement parts, use genuine POLARIS parts available from your POLARIS dealer. Record maintenance and service in the Maintenance Log beginning on page 144.
Improperly performing the procedures marked with a n could result in component failure and cause an accident, which may result in serious injury or death. Always have an authorized POLARIS dealer perform these services. Maintenance Chart Key Perform more often for vehicles subjected to severe use.
Page 82
50 H 500 (800) Lubricate Front suspension 50 H 500 (800) Lubricate Rear suspension 50 H 500 (800) Lubricate Perform these procedures more often for vehicles subjected to severe use. E Emission-Related Service Have an authorized POLARIS dealer perform these services.
Page 83
MAINTENANCE Periodic Maintenance Chart Item Maintenance Interval Remarks (whichever comes first) Hours Calendar Miles (Km) E Throttle Cable/ 50 H 500 (800) Inspect; adjust; lubricate; ETC Switch replace if necessary E Throttle Body 50 H 500 (800) Inspect duct for proper seal- Intake Duct ing/air leaks Drive belt...
DOT 4 Only Page 30. ADC Fluid Demand Drive Page 87. PLUS Fluid Front Prop POLARIS Grease fittings (3 pumps maximum) every 500 miles, Shaft Yoke Premium U-Joint before long periods of storage, or after pressure Lube washing or submerging.
Synthetic 2W-50 4-cycle oil or a similar oil for this engine. See the table on page 80 for fluid recommendations, capacities and plug torques. Oil may need to be changed more frequently if POLARIS oil is not used. Always use 2W-50 oil. Follow the manufacturer's recommenda- tions for ambient temperature operation.
MAINTENANCE Engine Oil Oil and Filter Change See the table on page 80 for fluid recommendations, capacities and plug torques. Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 76. Always change the oil filter whenever changing oil.
Page 87
Oil and Filter Change 9. Place shop towels beneath the oil filter. Using an oil fil- ter wrench (available from your POLARIS dealer), turn the filter counter-clockwise to remove it. 10. Using a clean dry cloth, clean the filter sealing surface on the crankcase.
MAINTENANCE Transmission Oil POLARIS recommends the use of POLARIS AGL PLUS Transmission Fluid for this transmission. See the table on page 80 for fluid recom- mendations, capacities and plug torques. Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 76.
Page 89
MAINTENANCE Transmission Oil Oil Change 1. Remove the footwell. 2. Place a drain pan under the gearcase. Remove the drain plug. Allow the oil to drain completely. 3. Clean and reinstall the drain plug. Torque to specification. 4. Remove the fill plug. Add the proper amount of the recommended oil.
Page 90
Always check and change the demand drive fluid at the inter- vals outlined in the Periodic Maintenance Chart beginning on page 76. See page 131 for the part numbers of POLARIS products. Change the front gearcase fluid every 25 hours if the ADC unit is exposed to extreme use.
Page 91
We recommend the use of POLARIS Demand Drive Plus Fluid for the ADC unit. Maintain the fluid level between the minimum and maximum marks on the reservoir. See page 131 for the part numbers of POLARIS products. NOTICE: Do not use brake fluid. Brake fluid will damage rubber components in the hydraulic system.
MAINTENANCE Active Descent Control (ADC) Fluid Fluid Change 1. Position the vehicle on a level Bleeder surface. Before performing the Screw fluid change, allow the vehicle to sit for at least 30 minutes. Bleeder 2. Thoroughly clean the areas Valve Screw around and on the ADC reservoir and bleeder valves...
Always check and change the rear gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 76. See page 131 for the part numbers of POLARIS products. The fill plug is located on the rear of the gearcase. The drain plug is located on the bottom of the gearcase.
Check the coolant level and maintain as recommended by adding coolant to the recovery bottle. POLARIS recommends the use of POLARIS Premium 60/40 anti- freeze/coolant or a 50/50 mixture of high quality aluminum compatible anti-freeze/coolant and distilled water. POLARIS Premium 60/40 is already premixed and ready to use.
Page 95
MAINTENANCE Cooling System Recovery Bottle Coolant The recovery bottle fluid level can be viewed from inside the front right wheel well. Access the recovery bottle cap under the front box. See page 1. View the fluid level in the bottle. 2.
Radiator Coolant To ensure that the coolant maintains its ability to protect the engine, POLARIS recommends that you drain the system completely every two years and add a fresh mixture of antifreeze and water. Replace the coolant any time the cooling system has been drained for maintenance or repair.
MAINTENANCE Brakes Hand Brake The front and rear brakes are hydraulic disc brakes, activated by moving the single brake lever toward the handlebar. These brakes are self- adjusting. Under normal operation, the diaphragm extends into the reservoir as fluid level drops. If the fluid level is low and the diaphragm is not extended, a leak is likely and the diaphragm should be replaced.
1.5 mm more than the front measurement on each side of the vehicle to obtain the recommended 0" to 1/8" (0-3 mm) toe out alignment. 5. Repeat the measurement procedure on the other side of the vehicle. 6. If you discover improper alignment, see your POLARIS dealer for service.
Page 99
MAINTENANCE Seats Passenger Seat Removal 1. Pull the latch at the rear of the seat. 2. Pivot the rear of the seat upward and remove the front legs of the seat base from the frame. 3. To reinstall the seat, position the front legs of the seat base under the frame.
Page 100
MAINTENANCE Seats Passenger Seat Suspension 1. Remove the passenger seat. 2. Remove the fastener retaining the passenger seat shock to the passenger seat support. 3. Pivot the seat support upward to access the lower shock fastener. Remove the lower shock fastener. 4.
Page 101
MAINTENANCE Side Panel/Footwell Removal 1. Remove the seat before removing a side panel. 2. To remove a side panel or footwell, remove the fasteners securing it to the frame. Lift the right side panel upward while removing it to clear the shifter knob Plastic Rivet Hex Head Screw Plastic Rivet...
MAINTENANCE Tires WARNING Operating your ATV with worn tires, improperly inflated tires, non-standard tires or improperly installed tires will affect vehicle handling and could cause an accident resulting in serious injury or death. Always follow all tire maintenance procedures as outlined in this manual and on the labels on the vehicle. Always use original equipment size and type when replacing tires.
Tires Front Wheel Hub Tightening Front wheel bearing tightness and spindle nut retention are critical com- ponent operations. All service must be performed by your authorized POLARIS dealer. Wheel Removal 1. Stop the engine. 2. Place the transmission in PARK.
MAINTENANCE Tires Wheel Installation 1. Place the transmission in PARK. 2. Lock the parking brake. 3. Place the wheel on the hub with the valve stem toward the outside and rotation arrows on the tire pointing toward forward rotation. 4. Install the wheel nuts and finger-tighten them. 5.
MAINTENANCE Air Filter 1. Remove the seat. Screws 2. Remove the air box cover screws, and remove the air box cover. 3. Remove the filter. 4. Remove the fabric type pre- filter from the main filter. Wash the pre-filter in soapy water, then rinse and let dry.
MAINTENANCE Fuse Replacement If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short cir- cuits that may have caused the blown fuse, then replace the fuse. Spare fuses are provided in the fuse box.
MAINTENANCE Lights Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses become dirty during normal operation. Clean head- lights frequently and replace burned out headlamps promptly. Always make sure lights are adjusted properly for best visibility. Headlight Lamp Replacement When servicing a halogen lamp, avoid touching the lamp with bare fin- gers.
MAINTENANCE Lights High Beam Adjustment The headlight beam can be adjusted slightly upward or downward. Use the following procedure to make the adjustment. 1. Position the vehicle on a level surface with the headlight approxi- mately 25 ft. (7.6 m) from a wall. Place the transmission in PARK. 25 ft.
Page 109
MAINTENANCE Lights Low Beam Adjustment Phillips Screw The low beam can be adjusted slightly upward or downward. 1. Loosen the phillips screw located at the rear of the headlamp. 2. Tilt the headlamp upward or downward. 3. Tighten the screw.
MAINTENANCE Lights Headlight Housing Replacement 1. Remove the five (5) headlight pod screws. 2. Lift the pod cover and disconnect the speedometer harnesses from the speedometer. 3. Unplug the headlamp from the wiring harness. 4. Use a small screwdriver to remove the o-rings from the headlight mounting tabs.
MAINTENANCE Lights Lower Headlamp Replacement 1. Turn the back of the headlight harness counter-clockwise and pull the harness assembly away from the headlight assembly. 2. Remove the headlamp and install the new headlamp. 3. Reinstall the harness assembly into the headlight assembly. Harness 4.
Refer to the specifications section beginning on page 132 for the recom- mended spark plug type and gap for your vehicle. Torque spark plugs to specification. NOTICE: Using non-recommended spark plugs can result in serious engine damage. Always use POLARIS-recommended spark plugs. Torque Specification Plug Condition New Spark Plug 9-11 ft.
Page 113
MAINTENANCE Spark Plugs Spark Plug Inspection Normal Spark Plug The normal insulator tip is gray, tan or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indi- cates the proper type and heat range for the engine and the service. The tip should not be flaky and white.
MAINTENANCE Vehicle Immersion If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined below.
MAINTENANCE Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death. Never run the engine in an enclosed area. Remove any combustible materials from the area. Wear eye protection and leather work gloves.
• Always follow all recommended maintenance procedures. See your dealer as outlined in the owner's manual. • This PVT system is intended for use on POLARIS products only. Do not install it in any other product. • Always make sure the PVT housing is securely in place during operation.
Page 117
MAINTENANCE PVT System The basic operation of the POLARIS PVT system is dependent on engine speed and vehicle torque requirements. As engine speed increases, the force exerted on the movable drive sheave by the fly- weights also increases. This, in turn, increases the amount of pinch applied to the drive belt.
MAINTENANCE PVT System When To Use Low Range and High Range Condition Range to Use Operating at speeds less than 7 MPH (11 km/h) Towing heavy loads Operating in rough terrain (swamps, mountains, etc.) Operating at speeds greater than 7 MPH (11 km/h) High PVT Drying There may be some instances when water is accidently ingested into the...
(black) cable last. Your ATV is equipped with a sealed battery, which requires little main- tenance. POLARIS does not recommend using a conventional battery in this vehicle. The orientation of the battery could result in electrolyte leakage, which would shorten the life of the battery considerably.
POLARIS recommends maintaining battery charge by using a POLARIS Battery Tender charger or by charging about once a month to make up for normal self-discharge. Battery Tender can be left connected during the storage period, and will automatically charge the battery if the voltage drops below a pre-determined point.
MAINTENANCE Battery Battery Charging The following battery charging instructions apply only to the installa- tion of a sealed battery. Read all instructions before proceeding with the installation of this battery. The sealed battery is already filled with electrolyte and has been sealed and fully charged at the factory.
Page 122
MAINTENANCE Battery Battery Charging (Sealed Battery) Always verify battery condition before and 1-2 hours after the end of charging. Charge Time State of Voltage Action (Using constant current Charge charger @ standard amps specified on top of battery) 100% 12.8-13.0 volts None, check at 3 None required mos.
MAINTENANCE Throttle Body/Idle RPM Idle RPM is preset by the manufacturer. If the engine idle speed is not satisfactory, please see your POLARIS dealer for adjustment. Throttle Cable Freeplay 1. Remove the four cover screws from the right han- dlebar control and remove the cover.
Page 125
6. If idle speed remains above or below the recommended setting (see specification pages), verify the correct gap. If gap is correct and idle speed is still not satisfactory, please see your POLARIS dealer for service. 7. With the engine running, turn the handlebars fully to the left and right.
Do not allow these types of products to contact the vehicle. The best and safest way to clean your POLARIS vehicle is with a gar- den hose and a pail of mild soap and water. 1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts last.
Polishing the Vehicle POLARIS recommends the use of common household aerosol furniture polish for polishing the finish on your POLARIS vehicle. Follow the instructions on the container. Polishing Tips • Avoid the use of automotive products, some of which can scratch the finish of your vehicle.
122. Stabilize the Fuel 1. Fill the fuel tank. 2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer. Follow the instructions on the container for the recom- mended amount. Carbon Clean removes water from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings, valves and exhaust systems.
Page 129
5. If POLARIS fuel system additive is not used, the fuel tank, fuel lines, and injectors should be completely drained of gasoline.
Accessories Auxiliary power outlets provide 12-volt power for operating accesso- ries. Accessory outlets are available for all models. POLARIS also has a wide range of additional accessories available for your ATV. Always install accessories that are approved for ATV use. Please see your POLARIS dealer.
PVT system Clutch malfunction See your POLARIS dealer. Poor engine performance Check for fouled plugs or foreign material in gas tank or fuel lines. See your dealer. Slippage from failure to...
Page 132
Inspect plugs and replace if necessary No spark to spark plug Inspect plugs, verify stop switch is on Water or fuel in crankcase Immediately see your POLARIS dealer Low battery voltage Recharge the battery to 12.8 VDC Mechanical failure See your dealer...
Page 133
TROUBLESHOOTING Engine Pings or Knocks Possible Cause Solution Poor quality or low octane fuel Replace with recommended fuel Incorrect ignition timing See your dealer Incorrect spark plug gap or heat range Set gap to specs or replace plugs Engine Runs Irregularly, Stalls or Misfires Possible Cause Solution Fouled or defective spark plug(s)
TROUBLESHOOTING Engine Stops or Loses Power Possible Cause Solution Out of fuel Refuel, cycle key to ON position three times for 5 seconds each, then start Kinked or plugged fuel vent line Inspect and replace Water is present in fuel Replace with new fuel Fouled or defective spark plug(s) Inspect, clean and/or replace spark plugs...
2100 Hwy 55, Medina, MN 55340 U.S.A. Telephone 763-542-0500 April 22, 2010 We, Polaris Industries Inc., declare that the vehicles listed below conform to the essential health and safety requirements applicable to off-road all-terrain vehicles. APPLICABLE EUROPEAN DIRECTIVES TEST / EVALUATION METHODS...
WARRANTY COVERAGE AND EXCLUSIONS: LIMITATIONS OF WARRANTIES AND REMEDIES The POLARIS limited warranty excludes any failures that are not caused by a defect in material or workmanship. This warranty does not cover accidental damage, normal wear and tear, abuse or improper handling. This warranty also does not cover any ATV that...
Page 142
This warranty does not cover the use of unauthorized lubricants, chemicals, or fuels that are not compatible with the ATV. The exclusive remedy for breach of this warranty shall be, at POLARIS' exclusive option, repair or replacement of any defective materials, or components or products. THE REMEDIES SET FORTH IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WARRANTY.
Page 143
HOW TO OBTAIN WARRANTY SERVICE If your ATV requires warranty service, you must take it to a POLARIS dealer authorized to repair POLARIS ATVs. When requesting warranty service you must present your copy of the Warranty Registration form to the dealer. (THE COST OF TRANSPORTA- TION TO AND FROM THE DEALER IS YOUR RESPONSIBILITY).
Page 144
You should warranty register your vehicle at a local POLARIS dealer in your new country immediately after you move to continue your warranty coverage and to ensure that you receive safety information and...
Page 145
How to Get Service If Purchased From A Private Party: If you purchase a POLARIS product from a private citizen, to be kept and used outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied.
Page 146
This emissions limited warranty is in addition to the POLARIS standard limited war- ranty for your vehicle. POLARIS Industries Inc. warrants that at the time it is first pur- chased, this emissions-certified vehicle is designed, built and equipped so it conforms with applicable U.S.
Page 147
POLARIS dealer to perform any service that may be necessary for your vehi- cle. POLARIS also recommends that you use only Pure POLARIS parts. It is a potential violation of the Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the effectiveness of the vehicle's emission controls.
MAINTENANCE LOG Present this section of your manual to your dealer each time your vehicle is serviced. This will provide you and future owners with an accurate log of maintenance and ser- vices performed. DATE MILES TECHNICIAN SERVICE PERFORMED / COMMENTS (KM) OR HOURS...
Page 149
MAINTENANCE LOG DATE MILES TECHNICIAN SERVICE PERFORMED / COMMENTS (KM) OR HOURS...
Page 151
INDEX Fluid Hand Brake ....93 Active Descent Control..87 Handlebar Adjustment ..119 ADC .
Page 152
Periodic Maintenance Chart ..76-79 Operating on Pavement ..13 Polaris Product List ... . 131 Operating on Public Roads ..13 Polishing the Vehicle.
Page 153
INDEX Severe Use ....76 Taillight Lamp Replacement ..107 Side Panel Removal ... . . 97 Throttle Body Adjustment .