Table of Contents
Advertisement
Functional Description
depends entirely upon which, if any, PMC is installed in the CPCI-6020 PMC site. To
accommodate the pluggable nature of a PMC, a custom form factor pluggable I/O module is
presented here. A physical representation of the CPCI-6020-MCPTM-01 and a I/O module
sample is shown below.
Figure 4-5
PMC Interface Module Layout
HOST I/O
J5
PMC I/O
J4
J3
SIM 1
COM 2
SIM 2
EIDE
4.22
PMC Interface Module Form Factor
The PMC Interface Module (PIM) form factor, as defined by the VITA36 standard, is identical to
the single-wide PMC form factor, with the following differences:
Shorter by 80 mm
Deletes the +5 V and +3.3 V keys
Pn1 and Pn3 are deleted
The 80 mm is cut out of the middle of the PIM. This means that it preserves all the features near
the front edge of the board as well as the features close to the back of the board without keeping
the complete middle portion of the board (80 mm less).
104
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CPCI-6020 RTM
Floppy
Mouse KB
Enet 1
Enet 2
COM1
COM3
COM4
PMC Interface Module Form Factor
PMC I/O
PMC
Module
T1/E1
T1/E1
SCC
Advertisement
Table of Contents
