NEC AP300 Installation Manual page 47

Figure 25. Cutting the foam to allow the antenna to fit into it, in the required position.
23. Lead the coax cables to the antenna via the groove in the top of the foam and push
the antenna into its final position into the foam.
Note: You can change the position of the antenna to the required position in the
foam, by means of turning the antenna or giving it some tilt.
Figure 26. AP300 and directional antenna in their positions.
18 Outdoor Cabinet Isolated - Installation Manual March 2010
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner