NEC AP300 Installation Manual page 19

5. Lead the Cat 5 cable to the AP300 cabinet and connect the RJ45 connector. Push
the cable into the groove.
6. Push the cabinet onto the mounting plate.
Note: When pushing the AP300 on to the mounting plate, make sure that you
hear/feel a distinct click. This indicates that the AP300 is firmly mounted to
the mounting plate.
1.
March 2010
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Figure 15. Cable at rear side of the cabinet.
Figure 16. AP300 mounted against the wall.
AP300 Customer Engineer Manual 13