Installing Utility Output Expansion Modules; Installing Wireless Expanders; Installing Bus Sounders (Sirens) - Risco ProSYS Plus Installation And Programming Manual

Installing Utility Output Expansion Modules

The ProSYS Plus supports the following programmable UO (Utility Output)
expansion modules, whose outputs may be activated as a result of numerous
events related to system, partition, zone, or user:
4 x 3A Relay Output Expander
8 x 100 mA Open-Collector Output Expander
•
To install UO expansion module(s), refer to their packaged installation
instructions

Installing Wireless Expanders

A Wireless Expander module can be installed in the box/enclosure housing, as well
as on RISCO bus lines.
NOTE: When adding a wireless expander, define the wireless expander's "Bypass
Box Tamper" as YES if the wireless expander is mounted inside the ProSYS Plus
box / enclosure housing and not in its own.
•
To install Wireless Expander modules, refer to the packaged installation
instructions.

Installing Bus Sounders (Sirens)

ProSYS Plus is compatible for bus sounders, such as the ProSound and Lumin8.
•
To install bus sounders, refer to their packaged installation instructions
11/2017 Page 44 5IN2413 B