Configuring Ipv6 Port Service - Zte ZXHN H108N Maintenance Management Manual

Steps
1. On the navigation tree, choose [Network→ LAN→Prefix Delegation]. The IPv6 prefix delegation
configuration page is displayed, see
Figure 24 IPv6 Prefix Delegation
Table 18 describers the parameters for IPv6 prefix delegation.
Table 18 IPv6 Prefix Delegation Parameters
Parameter
WAN Connection
Delegation
2. In the WAN list, click
3. After the configuration, click Modify to update.

6.3.7 Configuring IPv6 Port Service

This procedure introduces how to disable the IPv6 DHCP service for the specified interface or SSID
when the global IPv6 DHCP function is enabled.
Prerequisite
Before configuring IPv6 port service, make sure that the global IPv6
Steps
1. On the navigation tree, click [Network→ LAN→ DHCP Port Service ( IPv6 )]. The IPv6 port
service configuration page is displayed, see
Figure 24.
Description
The configured WAN connection
Prefix delegation mode:
RA
DHCPV6
and configure the prefix delegation mode.
Figure
42
DHCP service is enabled.
25.