Advertisement
Advertisement
Table of Contents
Related Manuals for Zte ZXHN H198A
Summary of Contents for Zte ZXHN H198A
-
Page 2: User Manual
Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory... -
Page 3: Safety Precautions
Safety Precautions Usage Cautions � Read all the safety cautions carefully before using the device. � Only use the accessories included in the package, such as power supply adapter. � Do not extend the power cord, otherwise the device will not work. �... -
Page 4: Packing List
Hereby,ZTE CORPORATION,declares that this Radio LAN device is in compli- ance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Packing List Please make sure the ZXHN H198A package contains the items, refer to Table 2-1. Table 2-1 Package Contents Component Name... - Page 5 Figure 3-1 shows the indicators on the front panel of the ZXHN H198A. Figure 3-1 Indicators of the ZXHN H198A Table 3-1 describes the indicators on the front panel of the ZXHN H198A . Table 3-1 Indicators on the Front Panel...
- Page 6 Indicator Status Description The device is not powered on, there is no WAN connection with Internet properties configured. Sending and receiving data packets is Solid red abnormal. Internet There is a WAN connection with Internet Solid green properties configured and the WAN configuration is effective.
-
Page 7: Interfaces And Buttons
Indicator Status Description The device is not powered on or the USB interface is not connected. USB1, The USB interface is connected and operating Solid green USB2 in host mode, but no data is being transmitted. Flashing green Data is being transmitted on the interface. Interfaces and Buttons Figure 4-1 shows the interfaces and buttons on the back panel of the ZXHN H198A. -
Page 8: Product Features
RJ-45 port, used to connect to the network provided by the ISP. Note: The USB1 button is on a side of the ZXHN H198A. Product Features The ZXHN H198A supports the following features: � Provides one GE port with RJ-45 connector for Ethernet Uplink. -
Page 9: Technical Specifications
Supports SNTP. � Supports Trace route Diagnosis. � Supports ping diagnosis. Technical Specifications For the technical specifications of the ZXHN H198A , refer to Table 6-1. Table 6-1 Technical Specifications Item Specification 166 mm×160 mm×34 mm Dimensions (Without the base) (Length ×... -
Page 10: Hardware Connection
Storage temperature –45 ℃~70 ℃ Storage humidity 5%~100% Hardware Connection The connections between the ZXHN H198A and other devices. Troubleshooting The Power indicator on the front panel is off after the power button is pressed. � Power switch does not turn On. -
Page 11: Fcc Statement
� The Ethernet cable is not correctly connected to the LAN interface. � The network device connected to the LAN interface is not powered on. The WAN indicator on the front panel is off after the device is powered on. �... - Page 12 To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's author- ity to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Need help?
Do you have a question about the ZXHN H198A and is the answer not in the manual?
Questions and answers