Replacing Air Valve - Marzocchi X-Fly Instructions Manual

REPLACING AIR VALVE

FIG. 13
This operation can be performed when fork
is fully assembled and fitted on bike, but
only after draining inner pressure.
If the air valve is disassembled with the fork
removed, keep the fork vertical so as to
avoid any oil leakage.
Remove the air valve (29) and its O-ring
(30) from cap using a standard valve
wrench.
Check O-Ring and blow compressed air
onto valve to eliminate possible clogging.
Immediately replace damaged valve.
When reassembling, slightly lubricate the
O-ring (30) and screw the air valve (29)
until it stops without forcing. Then, refit the
cap (2).
X-Fly
2
29
30