Control Unit Outputs R0 & R1; Relays Expansion Board 4581 Output 0 - Output 7; Inputs And Outputs Expansion Board 4583 Output 0 - 1; The 3361 Unit's Outputs Re0 & Re1 - Panasonic Firetracker FT1020G3 CIE Technical And Programming Manual

12.2 Control Unit outputs R
FT1020G3 Control Unit has 2 programmable relay outputs, contact ratings: 1A @ 30 V
R0 Relay output, NO or NC contacts programmable
R1 Relay output, NO or NC contacts programmable
Connections and more information, see drawing F732-02.
8 relays expansion board 4581 Output 0 – Output 7
12.3
Each 4581 board has eight programmable relay outputs:
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Relay contact ratings: Max. 2A @ 30 V DC.
Connections and more information, see drawing F729.
12.4

Inputs and Outputs expansion board 4583 Output 0 - 1

Expansion board 4583 has two programmable, supervised (monitored)
Output 0
Output 1
Connections and more information, see drawing F731.
See also chapter "Inputs and outputs expansion board 4583", page 28.
12.5 The 3361 unit's Outputs Re0 & Re1
Each 3361 unit has two programmable relay outputs. Contact ratings: 2A @ 30 V
V ).
AC
Re0
Re1
Connections and more information, see drawing F735.
The 3364 unit's VO0 – VO2
12.6
Each 3364 unit has two programmable, supervised (monitored)
Output VO0
Output VO1
84
This is default, but via EBLWin, it is possible to set each output individually as not supervised (not monitored). A normally high
output is not supervised. See also chapter "Calibration of supervised outputs", page 120
85
Cont. 1 A, during 10 ms 1.4 A.
& R
0
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Supervised voltage output, 24V
Supervised voltage output, 24V
Relay output, NO or NC contacts programmable
Relay output, NO or NC contacts programmable
Supervised voltage output, 24V
Supervised voltage output, 24V
81
Technical/Programming Manual
1
, max. 200 mA (Fuse F1).
DC
, max. 200 mA (Fuse F2).
DC
82
voltage outputs:
85
DC
85
DC
FT1020G3 Rev 2.2.1
84
voltage outputs:
/ 125
DC