Siemens Sinamics S120 Diagnostic Manual page 915

/REDUCE_CALC_TIME/ No. 132
Definitions: PI service _N_NCKMOD (BIT-1) has been rejected.
Not permitted if:
Should not occur.
/SIMULATION_ON_OFF/ No. 133
Definitions: PI service _N_NCKMOD (BIT-1) has been rejected.
Not permitted if:
Should not occur.
Abort subroutine execution /PROGCANCELSUB/ No. 17
Definitions: Cancel the subprogram execution.
(VDI signal: program level cancel)
Not permitted if:
1. The nesting depth is too great
2. If there is a reorganize brake error
Possible actions:
1. Cancel program
2. Cancel program
Abort subroutine repeat /PROGRESETREPEAT/ No. 16
Definitions: Cancel the subprogram repetition.
(VDI signal: delete subprogram number of passes)
Not permitted if:
1. The nesting depth is too great
2. If there is a reorganize brake error
Possible actions:
1. Cancel program
2. Cancel program
Activate block skip /PROGMODESLASHON/ No. 61
Definitions: Activate skip slash blocks
(VDI signal: skip block)
Not permitted if:
1. The nesting depth is too great
Possible actions:
1. Wait until previous ASUB has finished or cancel program
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
List of actions
915