Number of decimals
The LWT allows you to set the number of decimals to display on screen for length, flow and volume
units.
To set the number of decimals to display for these units throughout the interface:
1 Select Display > Length Format, Flow Format or Volume Format.
2 Press Edit.
3 From the list that appears, highlight the number of decimals to display (X, X.X, X.XX, X.XXX) and
press OK.
Volume and flow data can have their own decimals settings (for more information on volume and flow
measurements, see also "Setting up linearization" on page 52).
Date format
To determine how dates are displayed, you need to select a date format:
1 Select Display > Date/Time Format.
2 Press Edit.
3 From the list that appears, highlight the date format that you want to use (DD-MM-YYYY, MM-DD-
YYYY, YYYY-MM-DD) and press OK.
38
User Guide